- Home
- Model
- HONDA 401 - 750cc
- CB500F
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Other Caburetor Parts
- CHERRY
- CHERRY: O-ring for CR Carburetor Valve Seat (9351-13080 Correspondence)
O-ring for CR Carburetor Valve Seat (9351-13080 Correspondence)
- Product number: CAB-ORG085
-
- IN STOCK
- Out Stock
- CHERRY
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Quantity: 1
[Dimensions]
Outer Diameter: Approx. 8.5mm
Inner diameter: Approx. 5.5mm
Wire Diameter: Approx. 1.5mm
Keihin CR stock part number: 9351-13080
[Dimensions]
Outer Diameter: Approx. 8.5mm
Inner diameter: Approx. 5.5mm
Wire Diameter: Approx. 1.5mm
Keihin CR stock part number: 9351-13080
[Description]
This is a valve seat O-ring for CR carburetor.
Compatible with Keihin CR OEM part number: 9351-13080.
If the overflow does not stop, this is the suspect.
It has been confirmed that it can be used with CR26.It is a universal product, but it works well.The diameter of the valve seat is a little large, so please apply oil or other lubricant to the valve seat and install it slowly.
I have confirmed that the valve seat of the stock carburetor of old CB400F can be used.
Compatible with Keihin CR OEM part number: 9351-13080.
If the overflow does not stop, this is the suspect.
It has been confirmed that it can be used with CR26.It is a universal product, but it works well.The diameter of the valve seat is a little large, so please apply oil or other lubricant to the valve seat and install it slowly.
I have confirmed that the valve seat of the stock carburetor of old CB400F can be used.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/