Extender Fender

[How is it used? Extension for short FFender.

Was the one you received as per Image? usually

How was your experience with it? usually

[Points to note] The Pin of the resin is poor.

How did it compare to other products? None

Other items that would be helpful
Point and hang of installation/Items to be purchased together/Opinions and requests to Manufacturer None

I installed this on my NC750X 2021.
I installed it because the Fender is too short for OEM and it makes the car body dirty.
It is recommended to fix it with Double-sided Tape and Pin, but since the quality of the Double-sided Tape that was included seemed to be good, I installed it only with Double-sided Tape.

I've driven about 500km and there's no sign of it coming off.

My car is made by Honda, the model is NC750X, and the year is October 2020. I bought P&A’s front fender on webike. Its material is plastic; I don’t know why the original car’s front fender is so short? When installing this extension plate, the front fender of the original car must be removed and fixed with 3M glue. It is best to use 3 or 4 rivets to fix it. It is still not possible to ride too fast, otherwise the radiator plate of the water tank will still be thrown. . ---------------------------------------------- My car is Honda brand, model is NC750X, the year is October 2020. I buy on webike the front fender of goods P & A, and its material is plastic; do not know why the original car's front fender so short? When installing the front fender panels should extend the original car demolished, fixed with 3M adhesive, preferably with three or four rivets fixed, or can not ride too fast, otherwise it will still dump tank cooling plate. Powered by Google Translator

Basically, I don't ride on a rainy day, but when I passed the place where water is being sprayed by construction, it was a horrible accident So I installed it
The intuition with the Fender was perfect, but the treatment of the end surface is quite rough Because the double-sided tape which comes with is too shabby, it is not possible to use the Nitto No. which I have on hand I replaced it with 577
I've noticed that many people seem to be installing it with just Double-sided Tape I also used the 2 included pins to prevent the situation where they were missing (4 Pin is attached.) It may be that Double-sided Tape was a thick type, but The pins were not long enough to stop properly, so I welded them together with a soldering iron
I haven't run in the water yet, but the effect is quite promising based on the position of the Tire That's right
I think the price is a bit too high, including the detail work

I felt uneasy with the attached Double-sided Tape so I added about 2 columns and installed it.
I think that the jump of the puddle has been alleviated.
Color : Because it is Unpainted and a simple shape it may be nice if it is a bit cheaper.