This is a holder base to be attached to a drink holder or cup holder in a vehicle. (Depending on the shape of the drink holder, it may not be able to be fixed properly or it may be unstable, but in most cases, it will work fine).It is a base part of the type used by tightening the screw of the rear view mirror of the motorcycle. The size of the hole is about 11mm, so please confirm the thickness of the screw of the part to be installed. The thickness of the plate is about 4mm.
More mounting parts here
Caution
*There may be some scratches or burrs left from the time of shipment from the manufacturer.There may be some unevenness or chips in the paint, but these are within the standard specifications of RAM mounts. *The manufacturer assumes no responsibility for any damages that may result from the use of this product. Installation and use of the product is at the discretion of the customer (Please use the product after confirming that it is securely installed.We also recommend that you use a strap or other fall protection just in case). *RAM mount products generally do not come with individual instructions.*Take care when tightening the handlebar clamps. Please confirm the tightening torque and other information in the maintenance information of each manufacturer, and take sufficient care so that no trouble will occur during operation. *Hexagonal bolts may be black depending on the lot.Now comes with a black one. *There may be some scratches or burrs left from the time of shipment from the manufacturer.There may be some unevenness or chips in the paint, but these are within the standard specifications of RAM mounts. *The manufacturer assumes no responsibility for any damages that may result from the use of this product.Please install and use at your own discretion.(Please use it after confirming that it is attached securely, and we recommend that you take measures to prevent it from falling such as a strap just in case). *RAM mount products generally do not come with individual instructions.
