- Home
- Motorcycle Parts
- Bodyworks
- Fuel Tank Accessories
- Fuel Tanks
- Neofactory
- Neofactory: Low Tunnel Peanut Tank Screw Cap
Low Tunnel Peanut Tank Screw Cap
- Product number: 011497
-
- IN STOCK
- Out Stock
- Neofactory
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Color: Bare (unpainted)
Material: Steel
Capacity: Approx. 6.9L
Length: Approx. 360mm (not including bracket)
Width: Approx. 220mm
Height: Approx. 190mm
The width of the tunnel: Approx. 50mm
Depth (forward): Approx. 45mm
Gas cock size: 3/8NPT x 1 1/4NPT x 2
Material: Steel
Capacity: Approx. 6.9L
Length: Approx. 360mm (not including bracket)
Width: Approx. 220mm
Height: Approx. 190mm
The width of the tunnel: Approx. 50mm
Depth (forward): Approx. 45mm
Gas cock size: 3/8NPT x 1 1/4NPT x 2
[Description]
Low tunnel type of peanut tank.
This is an original tank based on a dead stock tank from WASSELL in England and modified for Harley customization.
There are three gas flow points, and the two that are not used for the cock should be blocked with plug bolts.
This is an original tank based on a dead stock tank from WASSELL in England and modified for Harley customization.
There are three gas flow points, and the two that are not used for the cock should be blocked with plug bolts.
Note
Other types here
Caution
*Gas cap is only compatible with screw type.
*In some years, the screw type is a little tighter.
*If you do not insert it horizontally, it will not fit properly.
*Neofactory does not accept the shipment after coating, pre-treatment and painting in the tank.
*Modification is required for all models.
*In some years, the screw type is a little tighter.
*If you do not insert it horizontally, it will not fit properly.
*Neofactory does not accept the shipment after coating, pre-treatment and painting in the tank.
*Modification is required for all models.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/