Check my coupons
Product Detail
Specification:
Handlebar color: Black
[Set components]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Throttle cable and clutch cable: Black outer
Brake hose (right side): Full stainless steel mesh
[handlebar size]
Total height: 50mm
Full width: 780mm
Effective width of holder installation part: 150mm
Pullback size: 185mm
Insertion angle: 46 degrees
Forward leaning angle: 112 degrees
[Set components]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Throttle cable and clutch cable: Black outer
Brake hose (right side): Full stainless steel mesh
[handlebar size]
Total height: 50mm
Full width: 780mm
Effective width of holder installation part: 150mm
Pullback size: 185mm
Insertion angle: 46 degrees
Forward leaning angle: 112 degrees
[Description]
[Requires separate parts and work]
・Processing of switch hole drilling required
・Brake fluid required
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by powder electrostatic baking paint over black electrodeposition paint is applied.
Note
Other colorings are here.
Optional parts are here.
Caution
*There is also a brake hose for right to left caliper (HB7P050S) sold separately.
*The stock side cap can be used.
*The brake hose is different for ABS vehicles.
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types.
