- Home
- Model
- TRIUMPH 751 - 1000cc
- TIGER800
- Motorcycle Parts
- Handles & Control Parts
- Handlebars
- EFFEX
- EFFEX: EZ-FIT TAPER BAR Low
Check my coupons
Product Detail
Specification:
[Material] Aluminum
[Size]
Width: 751mm
Height: 35mm
Depth (pull): 103mm
Handle clamp outer diameter: Φ28.6
Handlebar outer diameter: Φ22.2
Handlebar inner diameter: M16xP2.00(L37)mm
Standing angle: 45 degrees
Aperture Angle: 17 degrees
Stock ratio: 7mm Down / 7mm Forward
[Weight] 800g
[Specification]
Hole machining: With wiring hole for grip heater
Clutch Cable (Hose) Fitting: Available
Throttle cable compatibility: Available
Brake hose fitment: Available
[Country of manufacture] Taiwan
[Size]
Width: 751mm
Height: 35mm
Depth (pull): 103mm
Handle clamp outer diameter: Φ28.6
Handlebar outer diameter: Φ22.2
Handlebar inner diameter: M16xP2.00(L37)mm
Standing angle: 45 degrees
Aperture Angle: 17 degrees
Stock ratio: 7mm Down / 7mm Forward
[Weight] 800g
[Specification]
Hole machining: With wiring hole for grip heater
Clutch Cable (Hose) Fitting: Available
Throttle cable compatibility: Available
Brake hose fitment: Available
[Country of manufacture] Taiwan
[Description]
・Stock handlebar guard can be installed.
・With wiring hole for grip heater
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●Move the lever holder to the left or right.
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
・With wiring hole for grip heater
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●Move the lever holder to the left or right.
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The brake hose and cables do not need to be replaced.
*Stock handlebar guard can be installed.
*Stock handlebar guard can be installed.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/