Check my coupons
Product Detail
Specification:
[Material]
InnerAluminum
External: Cast iron + stainless steel
[Size]
Φ200mm
[Location of use / Use method]
≪Compatible caliper≫
Stock calipers are OK for all models.
Brembo (Yamambo) installed on ZR 3YK
KN Planning 2POT (DK02 / DK05 series)
[Components]
Caliper Support
InnerAluminum
External: Cast iron + stainless steel
[Size]
Φ200mm
[Location of use / Use method]
≪Compatible caliper≫
Stock calipers are OK for all models.
Brembo (Yamambo) installed on ZR 3YK
KN Planning 2POT (DK02 / DK05 series)
[Components]
Caliper Support
[Description]
Big rotor and caliper support included.
Enlarged Φ155 to Φ220.
The braking power is greatly improved compared to the stock.
Enlarged Φ155 to Φ220.
The braking power is greatly improved compared to the stock.
Caution
*If the hole in the center of the disc side interferes with the wheel to which it is attached, please cut the inner diameter.
*GRAND AXIS 100 only (early model of 5FA1) .(Not available after 5FA2 because of 4 holes)
*Installation of the remote control JOGZR requires KN Planning front fork and KN Planning 2POT caliper.(Remote control JOGZR 2001 / 02 Product code:5PT-SET-01 - Remote control JOGZR 03 and later Item number: 5SW-SET-01).
*The caliper center will be slightly off depending on the caliper and front fork combination.Therefore, please adjust with washers.
*Bolts are not included, so 4 bolts are required separately.The bolt is (item number: BOLT-DISK)
*All calipers are Brembo type and stock calipers will not damage the wheel.
*If the caliper you are using is a Yamambo (Brembo) KN caliper, the rotor pins may come in contact with the brake pads and you will need to cut the pads slightly.
*This is a disc that is offset to the outside.It may buffer the bottom of the front fork.The fork outer tube needs to be cut.
*GRAND AXIS 100 only (early model of 5FA1) .(Not available after 5FA2 because of 4 holes)
*Installation of the remote control JOGZR requires KN Planning front fork and KN Planning 2POT caliper.(Remote control JOGZR 2001 / 02 Product code:5PT-SET-01 - Remote control JOGZR 03 and later Item number: 5SW-SET-01).
*The caliper center will be slightly off depending on the caliper and front fork combination.Therefore, please adjust with washers.
*Bolts are not included, so 4 bolts are required separately.The bolt is (item number: BOLT-DISK)
*All calipers are Brembo type and stock calipers will not damage the wheel.
*If the caliper you are using is a Yamambo (Brembo) KN caliper, the rotor pins may come in contact with the brake pads and you will need to cut the pads slightly.
*This is a disc that is offset to the outside.It may buffer the bottom of the front fork.The fork outer tube needs to be cut.