- Home
- Model
- HONDA 126 - 250cc
- VTR250 (MC33)
- Motorcycle Parts
- Frames / Protections
- Engine Slider / Frame Slider
- BATTLE FACTORY
- BATTLE FACTORY: Crash Protector
Check my coupons
Product Detail
Specification:
Color: Black
[Description]
●The crash protector minimizes the risk of damage to the crankcase and cover in the event of an accident.In addition, this prevents secondary disasters caused by oil splashing to the following vehicle and keeps the vehicle in a state where it can drive itself.
●PP material is used instead of the commonly used Duracon® resin to ensure appropriate hardness and friction.(In the case of Duracon® esin, the hardness is too high to absorb the impact and may damage the crankcase or cylinder head.)
●It can be used as an accessory for general public road vehicles, and can minimize damage to the crankcase, cover, cowl, etc. in the event of an accident.(MFJ non-compliant products are recommended.)
●PP material is used instead of the commonly used Duracon® resin to ensure appropriate hardness and friction.(In the case of Duracon® esin, the hardness is too high to absorb the impact and may damage the crankcase or cylinder head.)
●It can be used as an accessory for general public road vehicles, and can minimize damage to the crankcase, cover, cowl, etc. in the event of an accident.(MFJ non-compliant products are recommended.)
Caution
*Duracon® is a registered trademark of Polyplastics Corporation in Japan and other countries.
*Protector tip shape is MFJ regulation compatible 10R.
*Note: Depending on the circumstances of the fall or accident, the original purpose may not be achieved.
*'03 MFJ regulation has been revised and it must not protrude more than 20mm from the cowl.(Applicable vehicles are JSB and ST600 only)
*The fork tip has an additional R shape of 10R or more.However, since the basis is unclear, Battle Factory has prepared MFJ compatible products for race vehicle inspection, but for practice and for general public roads, they recommend the same 10R R shape and 20mm longer overall length than MFJ compatible products.(MFJ non-compliant product)
*For the original purpose, the non-MFJ compatible products are more appropriate.In addition, it is recognized that there is no problem of danger in the circuit.
*There may be changes in product specifications due to the manufacturer's reasons.
*Protector tip shape is MFJ regulation compatible 10R.
*Note: Depending on the circumstances of the fall or accident, the original purpose may not be achieved.
*'03 MFJ regulation has been revised and it must not protrude more than 20mm from the cowl.(Applicable vehicles are JSB and ST600 only)
*The fork tip has an additional R shape of 10R or more.However, since the basis is unclear, Battle Factory has prepared MFJ compatible products for race vehicle inspection, but for practice and for general public roads, they recommend the same 10R R shape and 20mm longer overall length than MFJ compatible products.(MFJ non-compliant product)
*For the original purpose, the non-MFJ compatible products are more appropriate.In addition, it is recognized that there is no problem of danger in the circuit.
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/