- Home
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Wheel Parts
- Other Wheel parts
- TANIDA
- TANIDA: HSAE JAPAN PCD Changer
Check my coupons
Product Detail
[Description]
It is a spacer to convert from 4H PCD100mm to PCD114.3mm.
PCD114.3mm wheels can now be installed, allowing for a wider selection of wheel designs and sizes.
PCD114.3mm wheels can now be installed, allowing for a wider selection of wheel designs and sizes.
Caution
*Because the length of the stock hub bolt may extend beyond the spacer, a clearance of 11mm or more is required on the back side of the wheel.
*If not, you will need to modify the hub bolts.
*If there is a protective cap at the tip of the center hub of the axle, please measure the height of the cap and if it is more than 14mm, it may not be able to be installed.
*The manufacturer does not know about the wheel matching.
*Always use through nuts for installation.
*If not, you will need to modify the hub bolts.
*If there is a protective cap at the tip of the center hub of the axle, please measure the height of the cap and if it is more than 14mm, it may not be able to be installed.
*The manufacturer does not know about the wheel matching.
*Always use through nuts for installation.
Applicable Models
Universal
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/