Mechanical Clutch Holder L-29 Aero Lever Set
- Product number: KOK-2057M×SV
Check my coupons
Product Detail
Specification:
Material: Aluminum (machined body)
[surface treatment]
Body: Hard Anodized (Option Selectable)
Lever: Black anodized (optional)
Handlebar diameter: Φ22.2 (inch bar not available)
Lever ratio: 29mm (Distance from lever pivot center to wire barrel center)
Wire Barrel Diameter: Φ8 (With plastic cover, it may be necessary to remove the cover)
Outer End Diameter: Φ9 / Φ8 (with wire spacer)
Lever adjustment: 20 ways adjustable click
Clutch Switch: Roller type micro switch as standard equipment
Aero lever as standard equipment (standard / middle / short)
[surface treatment]
Body: Hard Anodized (Option Selectable)
Lever: Black anodized (optional)
Handlebar diameter: Φ22.2 (inch bar not available)
Lever ratio: 29mm (Distance from lever pivot center to wire barrel center)
Wire Barrel Diameter: Φ8 (With plastic cover, it may be necessary to remove the cover)
Outer End Diameter: Φ9 / Φ8 (with wire spacer)
Lever adjustment: 20 ways adjustable click
Clutch Switch: Roller type micro switch as standard equipment
Aero lever as standard equipment (standard / middle / short)
[Description]
High balance of lightness and disengagement of the clutch!is this ratio.
It is not as light as 24mm ratio, but it is lighter than stock.
The sharpness is relatively sharp.
●Aero lever is included in the set.
●Three types of lever ratios are available!
●The lever length can be selected from standard, middle, and short.
●The color of the holder part can be ordered as an option!(Hard alumite setting not available)
●The lever color can be ordered as an option!
●You can choose from a total of 17 color anodized aluminum and 5 hard anodized aluminum colors for color orders!(Holder cannot be hard)
It is not as light as 24mm ratio, but it is lighter than stock.
The sharpness is relatively sharp.
●Aero lever is included in the set.
●Three types of lever ratios are available!
●The lever length can be selected from standard, middle, and short.
●The color of the holder part can be ordered as an option!(Hard alumite setting not available)
●The lever color can be ordered as an option!
●You can choose from a total of 17 color anodized aluminum and 5 hard anodized aluminum colors for color orders!(Holder cannot be hard)
Note
Brembo lever set is here.
Holder only here.
Holder only here.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*38mm or more from the outer end to the center of the barrel (40mm or more when using a wire spacer) is required.
*Images may contain other colors.
*There is no hard anodized color setting for the holder part.
*Images may contain other colors.
*There is no hard anodized color setting for the holder part.
Applicable Models
Universal
