Check my coupons
Product Detail
Specification:
for Twin Shock
for 5.5J Super Wide Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
for 5.5J Super Wide Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
[Description]
Maximum width (207-210mm) swingarm for monkey swingarm to fit 5.5J wide wheels.
Compared to the stock swingarm of the Monkey, it is wider by 20mm on each side.
G-Craft Part Number: By installing the 39419 20mm sprocket spacer, you can use the stock monkey hub or the wide disc rear hub.
This swingarm is compatible with both drum and disc.
G-Craft Part Number: There are two types in the lineup, one using the 30047 Super Wide Suspension Base and the other is a low-cost type that does not use a suspension base.
■Option Description
・Cerakote finish
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
This gives a pear-like surface, but the coating film can be very thin.(25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
・Chain slider bolted
Change the chain slider from riveted to bolted.
Easy to replace when worn out.
Compared to the stock swingarm of the Monkey, it is wider by 20mm on each side.
G-Craft Part Number: By installing the 39419 20mm sprocket spacer, you can use the stock monkey hub or the wide disc rear hub.
This swingarm is compatible with both drum and disc.
G-Craft Part Number: There are two types in the lineup, one using the 30047 Super Wide Suspension Base and the other is a low-cost type that does not use a suspension base.
■Option Description
・Cerakote finish
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
This gives a pear-like surface, but the coating film can be very thin.(25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
・Chain slider bolted
Change the chain slider from riveted to bolted.
Easy to replace when worn out.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
To prevent interference with the side stand and sway bar, the G-Craft part number 30102 Stand Holder Type 2 is required for swingarms with a sway bar.
*The drum specification is produced.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*The brake stopper needs to be cut when installing the rear disc.
*The image includes the contents when each option is selected.
*The drum specification is produced.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*The brake stopper needs to be cut when installing the rear disc.
*The image includes the contents when each option is selected.
