Check my coupons
Product Detail
Specification:
for Twin Shock
Low Cost Type for 5.5J Super Wide Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
Low Cost Type for 5.5J Super Wide Wheel
Swingarm Pipe Shape: STD
Stabilizer: -
Material: Aluminum 7N01
[Description]
Maximum width (207-210mm) swingarm for monkey swingarm to fit 5.5J wide wheels.Compared to the stock swingarm of the Monkey (167-170mm wide), it is wider by 20mm on each side.
G-Craft part number: 39421 By installing the 20mm sprocket spacer, you can use the stock Monkey hub or the wide disc rear hub.This swingarm is compatible with both drum and disc.
This is a low-cost type that does not use a suspension support.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
Note
Click here for other G-Craft Monkey Twin Shock Swingarms.
Here are other swing arms for G-Craft Monkey Monoshock.
Click here for other G-Craft Monkey truss swing arms.
Click here for Other G-Craft Monkey Normal Look Swingarm.
Click here for Other G-Craft Monkey R Wheel Mount Twin Shock Swingarm.
For other G-Craft Standard Wheels Twin Shock Swingarm is here.
Click here for other G-Craft NSR wheel mounted twin shock swing arms.
Click here for other G-Craft Twin Shock Swingarm for Super Wide Wheels.
For other G-Craft Wide Wheel Twin Shock Swingarm is here.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*To prevent interference between the side stand and the stubby, G-Craft part number: 30102 Stand Holder Type 2 is required for swingarms with stubby.
*Only triple square pipe, chain slider is also attached at the bottom.
*The drum specification is produced.
*The brake stopper needs to be cut when installing the rear disc.
*The low cost type suspension receiver is 30mm higher than the normal twin shock type.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
*Only triple square pipe, chain slider is also attached at the bottom.
*The drum specification is produced.
*The brake stopper needs to be cut when installing the rear disc.
*The low cost type suspension receiver is 30mm higher than the normal twin shock type.
*Image 3 is optional: This is an image of the chain slider bolt fixing.
*Image 4 is optional: This is an image of the ball bearing structure of the pivot section.
*Image 5 is optional: The image above shows Stand Hook Base (M6).
