Check my coupons
Product Detail
Specification:
[Kit Contents]
Aluminum Throttle Holder
Throttle Tube
road control grip (tennis)
4 sizes of standard reels (35 / 40 / 45 / 50mm)
progressive cam reel
Japanese instruction manual
Aluminum Throttle Holder
Throttle Tube
road control grip (tennis)
4 sizes of standard reels (35 / 40 / 45 / 50mm)
progressive cam reel
Japanese instruction manual
[Description]
Link to the rider's right hand!
Innovative throttle kit that allows you to do the throttle work you want!
This is a setting part!
●This is the most advanced variable throttle kit available.
●The innovative reel change system allows the throttle opening rate to be adjusted to suit the track layout, track conditions and rider preference.
●The snap-on elbow and ultra-compact housing allow for easy reel replacement and installation.
●The new sleek design further reduces the space on the handlebar for lever clearance and throttle position.
●Use a smaller reel for larger throttle opening and a larger reel for smaller throttle opening.
●The included cam reel provides progressive throttle response.
●The specially designed reel allows for quick changes.Easy to install, adjust and maintain.
●The cable boot at the elbow keeps mud and dirt out and allows for smooth operation.
●Billet aluminum parallel adjusters allow for smooth installation and adjustment.
●The cable lower section uses a 5 mm housing with a PTFE liner.
●The cable upper section uses a 6mm housing for secure adjustment.
●This is the original design of Motion Pro.Patent pending.
Innovative throttle kit that allows you to do the throttle work you want!
This is a setting part!
●This is the most advanced variable throttle kit available.
●The innovative reel change system allows the throttle opening rate to be adjusted to suit the track layout, track conditions and rider preference.
●The snap-on elbow and ultra-compact housing allow for easy reel replacement and installation.
●The new sleek design further reduces the space on the handlebar for lever clearance and throttle position.
●Use a smaller reel for larger throttle opening and a larger reel for smaller throttle opening.
●The included cam reel provides progressive throttle response.
●The specially designed reel allows for quick changes.Easy to install, adjust and maintain.
●The cable boot at the elbow keeps mud and dirt out and allows for smooth operation.
●Billet aluminum parallel adjusters allow for smooth installation and adjustment.
●The cable lower section uses a 5 mm housing with a PTFE liner.
●The cable upper section uses a 6mm housing for secure adjustment.
●This is the original design of Motion Pro.Patent pending.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*In case the stock throttle body is used and the stock reel size is 33.4mm.The stock throttle assembly for this model includes an on / off switch, mode switch, and starter button.The Motion Pro accessory switch (YM11-0098) does not have a mode switch and cannot be used interchangeably with the stock throttle assembly.
*This model requires a longer-than-stock aftermarket handlebar (at least 50mm longer on the right side than the stock handlebar) in order to fit the Rev2 kit and have all the necessary switch functions.Then install the stock throttle assembly inside the Rev2 throttle housing.
*The Rev2 kit comes with a cable specifically designed for each model, but the Rev2 throttle itself is not model specific.Therefore, under certain circumstances, the Rev2 kit may not be a direct bolt-on due to the limited stock space.
*Depending on the installation method, if the handlebar is too short for the Rev2 throttle tube and grips, other control components may need to be moved or the handlebar replaced with a longer aftermarket one.
*It is your responsibility to determine the best method for your motorcycle and to ensure that the Rev2 kit is properly installed with the correct clearances for safe operation.
*The installation of the product must be carried out by a qualified mechanic, who must carefully check for proper functioning.
*Warning: Improper installation can result in serious injury or death.
*This model requires a longer-than-stock aftermarket handlebar (at least 50mm longer on the right side than the stock handlebar) in order to fit the Rev2 kit and have all the necessary switch functions.Then install the stock throttle assembly inside the Rev2 throttle housing.
*The Rev2 kit comes with a cable specifically designed for each model, but the Rev2 throttle itself is not model specific.Therefore, under certain circumstances, the Rev2 kit may not be a direct bolt-on due to the limited stock space.
*Depending on the installation method, if the handlebar is too short for the Rev2 throttle tube and grips, other control components may need to be moved or the handlebar replaced with a longer aftermarket one.
*It is your responsibility to determine the best method for your motorcycle and to ensure that the Rev2 kit is properly installed with the correct clearances for safe operation.
*The installation of the product must be carried out by a qualified mechanic, who must carefully check for proper functioning.
*Warning: Improper installation can result in serious injury or death.
