Check my coupons
Product Detail
Specification:
[Product Contents]
Off-set Sprocket 4mm/Fixing Plate each 1pc.
SCM Cap Bolt M6 x 10 x 2pcs.
[Corresponding Off-set Spacer]
Aluminum MONKEY Off-set Rear Sprocket Spacer 4mm NO4982
Manufacturer and Country of Origin: MINIMOTO Product
Off-set Sprocket 4mm/Fixing Plate each 1pc.
SCM Cap Bolt M6 x 10 x 2pcs.
[Corresponding Off-set Spacer]
Aluminum MONKEY Off-set Rear Sprocket Spacer 4mm NO4982
Manufacturer and Country of Origin: MINIMOTO Product
[Description]
Offset sprocket for Honda Monkey engine (stock spec).
Compared to the stock, it moves 4mm toward the generator cover.
Be sure to use with offset spacers.
Compared to the stock, it moves 4mm toward the generator cover.
Be sure to use with offset spacers.
Caution
*Generator cover and sprocket bolts interfere with each other.Therefore, it is necessary to shave the back surface of the cover.
*In particular, if you are using a 17T case, the underside of the case backside will interfere, so the cover will need to be shaved off.
*The offset sprockets apply more undue force.Therefore, please consider the use of this product in consideration of engine power.
*Images 3 and 4 are for reference only.This is not a set content.
*In particular, if you are using a 17T case, the underside of the case backside will interfere, so the cover will need to be shaved off.
*The offset sprockets apply more undue force.Therefore, please consider the use of this product in consideration of engine power.
*Images 3 and 4 are for reference only.This is not a set content.
