Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
glom JC61/JC75 *For 428 size conversion
DAX125 JB04 *428 for size conversion
MONKEY125 JB02 *428 for size conversion
CT125CT110 HUNTER CUB JA55/JA65
CROSSCUB110 JA45/JA60
SUPER CUB110-PRO JA42/JA61
SUPER CUB110 JA44/JA59
Show more
Product Detail
Specification:
Material: S45C (High carbon steel)
Size: 428
Race Exclusive
Recommended Number of Chain Link: 428 x 110L
Size: 428
Race Exclusive
Recommended Number of Chain Link: 428 x 110L
[Description]
Ideal for tuned engines!Sized-up chains reduce maintenance cycles!
428 size compatible drive sprocket (14T) lineup.
S45C (high carbon steel) is used for the drive sprocket.
In the case of the Grom, the drive chain is one size larger, so it can be used for engines with increased power.The larger chain size improves durability and reduces maintenance cycles.
428 size compatible drive sprocket (14T) lineup.
S45C (high carbon steel) is used for the drive sprocket.
In the case of the Grom, the drive chain is one size larger, so it can be used for engines with increased power.The larger chain size improves durability and reduces maintenance cycles.
Caution
*428 size drive sprocket and drive chain are required to install 428 size.
*When 16T or more is installed on Grom, a wide chain guide plate is required separately.If you change the license of knives to other than the stock number, there will be an error in the speedometer display.In this case, please use the speed pulse conversion unit.
Sprockets are consumable items.
*Inspect the sprockets every 1000km as a guide for general driving.(If the tip of the tooth has become thin, replace it with a new one.The life of the sprocket and chain can be greatly improved by daily lubrication.)
*Rear sprocket T number ÷ Front sprocket T number = Reduction ratioThe higher the value of this reduction ratio, the more emphasis is placed on acceleration, and the lower the value, the more emphasis is placed on maximum speed.
*The Grom requires a 428 size drive sprocket and drive chain.
*The stock chain for Super Cub 110 and Cross Cub 110 is 428 size.
*Super Cub 110 / Super Cub 110-Pro / Cross Cub 110 (Stock: 14T), Grom (Stock (420): 15T)
*Please refer to the compatibility chart for the stock number of knives.
*There may be changes in product specifications due to the manufacturer's reasons.
*When 16T or more is installed on Grom, a wide chain guide plate is required separately.If you change the license of knives to other than the stock number, there will be an error in the speedometer display.In this case, please use the speed pulse conversion unit.
Sprockets are consumable items.
*Inspect the sprockets every 1000km as a guide for general driving.(If the tip of the tooth has become thin, replace it with a new one.The life of the sprocket and chain can be greatly improved by daily lubrication.)
*Rear sprocket T number ÷ Front sprocket T number = Reduction ratioThe higher the value of this reduction ratio, the more emphasis is placed on acceleration, and the lower the value, the more emphasis is placed on maximum speed.
*The Grom requires a 428 size drive sprocket and drive chain.
*The stock chain for Super Cub 110 and Cross Cub 110 is 428 size.
*Super Cub 110 / Super Cub 110-Pro / Cross Cub 110 (Stock: 14T), Grom (Stock (420): 15T)
*Please refer to the compatibility chart for the stock number of knives.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
glom JC61/JC75 *For 428 size conversion
DAX125 JB04 *428 for size conversion
MONKEY125 JB02 *428 for size conversion
CT125CT110 HUNTER CUB JA55/JA65
CROSSCUB110 JA45/JA60
SUPER CUB110-PRO JA42/JA61
SUPER CUB110 JA44/JA59
Show more