Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
XL 07-21 Injection spec.
Product Detail
Specification:
Color: Bare (unpainted)
Material: steel
[Size]
Length: Approx. 440mm (not including bracket) Width :Approx. 270mm Height :Approx. 210mm
Width of the tunnel (at the bottom):Approx. 70mm-85mm Depth (max):Approx. 85mm
Front Stay Length :Approx. 85mm Rear Stay Length :Approx. 95mm
Capacity: Approx. 12L
1 set of mounting bolts included
Material: steel
[Size]
Length: Approx. 440mm (not including bracket) Width :Approx. 270mm Height :Approx. 210mm
Width of the tunnel (at the bottom):Approx. 70mm-85mm Depth (max):Approx. 85mm
Front Stay Length :Approx. 85mm Rear Stay Length :Approx. 95mm
Capacity: Approx. 12L
1 set of mounting bolts included
[Description]
This is the replica of the SPORTSTER model gas tank.
This is a large-capacity king type, so it can be used for long-distance touring.
The diamond design on the side gives it a custom look.
This is a large-capacity king type, so it can be used for long-distance touring.
The diamond design on the side gives it a custom look.
Caution
*The overflow pipe on the back of the tank may be bent due to the condition of the packaging and the brass material, but it is not normally used and the hole is closed, so there is no problem with the specifications.If you wish to install an overflow function, please repair and drill the pipe with pliers or the like before use.
*This product is a processed base, so the steel material is in its bare state.Rust may occur due to the characteristics of the product.
*The volume (gallons) is for reference only.Actual usable capacity may be lower than indicated after mounting on the bike.
*Please check the fitting and gas leak before painting.Please prepare the vent line accordingly.
*The dedicated flush mount type gas cap (009283, 009284) is required separately.
*The third image shows the installation image for '07 or later.
*When installing, the inside of the tunnel may interfere with stock wiring or connector holders depending on the vehicle, so it may be necessary to cut or reassemble the wiring as necessary.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
[Gasoline tank handling precautions]
*This product is a universal product and cannot be installed as a bolt-on.Some modification is required for installation.
*This product is delivered in the bare steel state.Please note that rust may occur due to the characteristics of the product, but this is a product that is designed to be painted.
*Always perform a leak test before painting to make sure there are no leaks.It is also essential to remove rust and coat the inside of the tank.
*Always perform a fitting test before installation and painting, and carry out processing and installation work as required.
*We are not responsible for any malfunctions caused by the combination with other parts (cock, cap, etc.) not made by Neofactory.
*Neofactory does not offer products with painting, in-tank coating, or processing.
*This product is a processed base, so the steel material is in its bare state.Rust may occur due to the characteristics of the product.
*The volume (gallons) is for reference only.Actual usable capacity may be lower than indicated after mounting on the bike.
*Please check the fitting and gas leak before painting.Please prepare the vent line accordingly.
*The dedicated flush mount type gas cap (009283, 009284) is required separately.
*The third image shows the installation image for '07 or later.
*When installing, the inside of the tunnel may interfere with stock wiring or connector holders depending on the vehicle, so it may be necessary to cut or reassemble the wiring as necessary.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
[Gasoline tank handling precautions]
*This product is a universal product and cannot be installed as a bolt-on.Some modification is required for installation.
*This product is delivered in the bare steel state.Please note that rust may occur due to the characteristics of the product, but this is a product that is designed to be painted.
*Always perform a leak test before painting to make sure there are no leaks.It is also essential to remove rust and coat the inside of the tank.
*Always perform a fitting test before installation and painting, and carry out processing and installation work as required.
*We are not responsible for any malfunctions caused by the combination with other parts (cock, cap, etc.) not made by Neofactory.
*Neofactory does not offer products with painting, in-tank coating, or processing.
Applicable Models
XL 07-21 Injection spec.
