Check my coupons
Product Detail
Specification:
Components: Exclusive bracket set, Mounting bolt set, Grommet set
[Description]
・The under cowl is specially designed for MONKEY R and It can be used for dress up and customization on the street.
・For any vehicles that have bolt holes on both sides of the cylinder, it can be installed by bolt-on with the attached bracket!
・Grommet collars are used on the cowl unit to increase vibration resistance!
・The oil drain on the bottom of the cowl eliminates carburetor overflow and water pooling when washing the vehicle.
・With oil catch function as engine blows!
[installation requirements]
・There must be bolt holes on both sides of the cylinder.
・This product cannot be installed with the stock exhaust.
・Because the bracket is attached from the bolt holes on both sides of the cylinder, it is necessary to have a cylinder with bolt holes, and if you do not have a cylinder with bolt holes, you will need to make your own special bracket.
・Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.
[How to install]
・As to installation, the back bracket (Bracket 1) is tightened with the M8 hole on the bottom of the engine, and the front bracket (Bracket 2) is attached using the M6 holes on both sides of the cylinder.
・Installation manuals are enclosed in the package.
・For any vehicles that have bolt holes on both sides of the cylinder, it can be installed by bolt-on with the attached bracket!
・Grommet collars are used on the cowl unit to increase vibration resistance!
・The oil drain on the bottom of the cowl eliminates carburetor overflow and water pooling when washing the vehicle.
・With oil catch function as engine blows!
[installation requirements]
・There must be bolt holes on both sides of the cylinder.
・This product cannot be installed with the stock exhaust.
・Because the bracket is attached from the bolt holes on both sides of the cylinder, it is necessary to have a cylinder with bolt holes, and if you do not have a cylinder with bolt holes, you will need to make your own special bracket.
・Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.
[How to install]
・As to installation, the back bracket (Bracket 1) is tightened with the M8 hole on the bottom of the engine, and the front bracket (Bracket 2) is attached using the M6 holes on both sides of the cylinder.
・Installation manuals are enclosed in the package.
Caution
*This product cannot be installed with the stock exhaust.
*Stock side stand, step, change pedal and brake pedal can be used!
*Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.
Made of FRP
*A painting is required separately.
Made of CFRP
*This is the clear gel coat finish of the carbon, but recommending you to paint with 2-part urethane clear before installation to prevent discoloration (yellowing) in sunlight.
*There may be changes in product specifications due to the manufacturer's reasons.
*Stock side stand, step, change pedal and brake pedal can be used!
*Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.
Made of FRP
*A painting is required separately.
Made of CFRP
*This is the clear gel coat finish of the carbon, but recommending you to paint with 2-part urethane clear before installation to prevent discoloration (yellowing) in sunlight.
*There may be changes in product specifications due to the manufacturer's reasons.
