Check my coupons
Product Detail
Specification:
[Maintenance Data]
・Pillion step: Available
・Center stand: Available
・Reverse change: Available
・Stock brake hose: Available
[Position]
Up / Back
35m / 20mm
45mm / 20mm
45mm / 30mm
・Pillion step: Available
・Center stand: Available
・Reverse change: Available
・Stock brake hose: Available
[Position]
Up / Back
35m / 20mm
45mm / 20mm
45mm / 30mm
[Description]
You can lay out the plate to match your exhaust!
The base plate only is single item.
The plate can be chosen by the exhaust.
It is available in metallic silver and super black.
The following types of plates are available.
・Exhaust plate for K-FACTORY CSR-UP type (without pillion part)
・Pillion plate for K-FACTORY CSR-UP type (*image 3:Example of installation)
・Pillion plate for stock single exhaust
(CSR straight type is also acceptable)
・Pillion plate for stock dual exhaust (EX)
(CSR straight type is also acceptable)
As with the coaxial type, the brake pedal and change pedal use sophisticated bearings to provide smooth, stress-free movement and support for riding.
Three different riding positions are available which allows you to choose your preferred riding position.
up back
35mm 20mm
45mm 20mm
4mm 30mm
The change / brake pedal can be mounted in two positions (5mm apart) to suit the size of the foot and the thickness of the boot.
A hydraulic oil pressure switch (sold separately) is used for the brake switch instead of the stock mechanical switch to simplify the rear master cylinder area.
The base plate only is single item.
The plate can be chosen by the exhaust.
It is available in metallic silver and super black.
The following types of plates are available.
・Exhaust plate for K-FACTORY CSR-UP type (without pillion part)
・Pillion plate for K-FACTORY CSR-UP type (*image 3:Example of installation)
・Pillion plate for stock single exhaust
(CSR straight type is also acceptable)
・Pillion plate for stock dual exhaust (EX)
(CSR straight type is also acceptable)
As with the coaxial type, the brake pedal and change pedal use sophisticated bearings to provide smooth, stress-free movement and support for riding.
Three different riding positions are available which allows you to choose your preferred riding position.
up back
35mm 20mm
45mm 20mm
4mm 30mm
The change / brake pedal can be mounted in two positions (5mm apart) to suit the size of the foot and the thickness of the boot.
A hydraulic oil pressure switch (sold separately) is used for the brake switch instead of the stock mechanical switch to simplify the rear master cylinder area.
Caution
*Oil pressure switch is required separately when driving on public roads.
*For the pillion step, please relocate the stock step bar.
*The image is metallic silver.
*For the pillion step, please relocate the stock step bar.
*The image is metallic silver.
