- Home
- Model
- KAWASAKI 1001cc -
- ZEPHYR1100 (ZR1100)
- Motorcycle Parts
- Handles & Control Parts
- Stem / Under Bracket / Triple Tree
- ACTIVE
- ACTIVE: Convertible Stem Kit
Check my coupons
Product Detail
Specification:
Material: A7075-T6 / anodized surface treatment
Offset amount: 32/37mm (stock 40mm)
Fork pitch: 210mm (same as stock)
Compatible fork 1: HYPERPRO Φ43 AH1 front forks (see description for recommended combination)
Compatible forks 2: Stock front forks (see description for recommended combination)
Handle lock: acceptable
Stem bearing press fit included
Handlebar stopper included
Offset amount: 32/37mm (stock 40mm)
Fork pitch: 210mm (same as stock)
Compatible fork 1: HYPERPRO Φ43 AH1 front forks (see description for recommended combination)
Compatible forks 2: Stock front forks (see description for recommended combination)
Handle lock: acceptable
Stem bearing press fit included
Handlebar stopper included
[Description]
It was developed based on the concept of street sports and designed in consideration of the total balance with the suspension.
It pursues the optimum driving performance for each vehicle and realizes sporty driving.
For some models, the stock key cylinder can be transferred and the handlebar can be locked.
[Suggested combination]
《32mm offset》
17inch wheels + stock front forks
When the wheel is changed to 17 inches, the excessive cutting of the steering wheel is mitigated and the amount of trail is corrected to the same amount as when 18 inches are installed for a sporty ride.
《37mm offset》
(1) 18inch wheel + stock front fork
(2) 18 inch wheels + HYPERPRO front forks (0mm protrusion)
(3) 17 inch wheels + HYPERPRO front forks (protruding 15mm)
It is lighter to lean into the corner, and the handling is more straightforward to turn naturally to the rider's will.
It pursues the optimum driving performance for each vehicle and realizes sporty driving.
For some models, the stock key cylinder can be transferred and the handlebar can be locked.
[Suggested combination]
《32mm offset》
17inch wheels + stock front forks
When the wheel is changed to 17 inches, the excessive cutting of the steering wheel is mitigated and the amount of trail is corrected to the same amount as when 18 inches are installed for a sporty ride.
《37mm offset》
(1) 18inch wheel + stock front fork
(2) 18 inch wheels + HYPERPRO front forks (0mm protrusion)
(3) 17 inch wheels + HYPERPRO front forks (protruding 15mm)
It is lighter to lean into the corner, and the handling is more straightforward to turn naturally to the rider's will.
Caution
*In case of using HYPERPRO AH1 front fork, the caliper support and caliper must be changed.
*When relocating the key cylinder, it is necessary to modify the stock key cylinder bolt.
*Images may contain other colors.
*When relocating the key cylinder, it is necessary to modify the stock key cylinder bolt.
*Images may contain other colors.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/