- Home
- Model
- HONDA 126 - 250cc
- CBR250RR (2016-)
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Foot Controls
- Rearsets Kits
- K-FACTORY
- K-FACTORY: Riding Footpeg Race Specification
Riding Footpeg Race Specification
- Product number: 073MZBR129N
-
- IN STOCK
- Out Stock
- K-FACTORY
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
lace specification
Material :Super duralumin machined
Position.
1:
2:
3:
4:
Material :Super duralumin machined
Position.
1:
2:
3:
4:
[Description]
Each part is made from super duralumin by high precision machining, and it is a race specification riding step which pursues the best position for more comfortable circuit riding on CBR250RR(17).
By having the step bar and pedals on separate axles, the rigidity of the step bar is increased, and in the event of a fall, damage to the step bar can be avoided to the extent possible.
*Except in cases where the pedal is damaged.
As with the coaxial type, the brake pedal and change pedal use sophisticated bearings to provide smooth, stress-free movement and support for riding.
There are 4 different positions to choose from, so you can choose your favorite riding position.
The change / brake pedal can be mounted in two positions (5mm apart) to suit the size of the foot and the thickness of the boot.
Both forward and reverse shift changes are possible.
A hydraulic oil pressure switch (sold separately) is used for the brake switch instead of the stock mechanical switch to simplify the rear master cylinder area.
By having the step bar and pedals on separate axles, the rigidity of the step bar is increased, and in the event of a fall, damage to the step bar can be avoided to the extent possible.
*Except in cases where the pedal is damaged.
As with the coaxial type, the brake pedal and change pedal use sophisticated bearings to provide smooth, stress-free movement and support for riding.
There are 4 different positions to choose from, so you can choose your favorite riding position.
The change / brake pedal can be mounted in two positions (5mm apart) to suit the size of the foot and the thickness of the boot.
Both forward and reverse shift changes are possible.
A hydraulic oil pressure switch (sold separately) is used for the brake switch instead of the stock mechanical switch to simplify the rear master cylinder area.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The image shows the condition of the fabric.
*Stock brake lamp switch cannot be used.Oil pressure switch is required when driving on public roads.
*Some cowl modification is required for installation.
*Stock brake lamp switch cannot be used.Oil pressure switch is required when driving on public roads.
*Some cowl modification is required for installation.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/