Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
SV650 ABS 16-21
Product Detail
Specification:
・Material: SUS304
Board thickness:0.5t
・All emblem colors included (black, red, blue, yellow, green)
Board thickness:0.5t
・All emblem colors included (black, red, blue, yellow, green)
[Description]
"The question is how to reconcile the conflicting themes of cooling efficiency and protection performance.
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
・The center part is fine and both sides are coarse hexagon mesh pattern.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse mesh on both sides has been designed with an aperture ratio that takes into account the conflicting themes of "cooling efficiency" and "protection performance".
・There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
・The center part is fine and both sides are coarse hexagon mesh pattern.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse mesh on both sides has been designed with an aperture ratio that takes into account the conflicting themes of "cooling efficiency" and "protection performance".
・There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
Caution
*Emblem stickers are included in all colors.(Black, Red, Blue, Yellow, Green)
*Specifications are subject to change without notice.
*Since the product is made of thin stainless steel plate, the edge of the product may hurt your hand.Please handle with care.
*Specifications are subject to change without notice.
*Since the product is made of thin stainless steel plate, the edge of the product may hurt your hand.Please handle with care.
Applicable Models
SV650 ABS 16-21
