New Super Oil Cooler Kit

  • Product number: 360-1134000
    • IN STOCK
    • Out Stock

Rp2,813,000 Rp3,024,000 -7%

*VAT 11% included

Webike Points: +28,130 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp10,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See All
XR50 Motard (AD14) All models XR100MOTARD (HD13) All models

Product Detail

Specification:

for STD Right Side Case Cover Processing
Oil Capacity within Condenser: 150cc (5-stages Core)/75cc (3-stages Core)
Oil Cooler: 3-stages Core Condenser
It is possible for bolt on installation.
with Vehicle Type Exclusive Bracket

[Description]

Necessities for high tuned engines including big bore.
The engine with high rpm and high performance emits huge amount of heat as a compensation, and it may be damaged by overheating or seizure if the engine is left in stock condition, so it is recommended to install the oil cooler.
The Super Oil Cooler Kit has the same heat radiation capacity (5-stage core) as 400cc class oil cooler, and shows stable engine performance even under severe conditions such as racing and under the hot sun.
Union bolts are used on the oil cooler for greater flexibility in hose routing.The union bolt has been anodized in color.
The hose is an outer layer braid hose with inner diameter Φ6.2 and outer diameter Φ12.6.It boasts high pressure resistance and high durability.

Caution

*Right side case cover requires modification.
*If you have installed a Big Bore kit, be sure to use it together with the oil filter kit (Vol.00-3).
*Stock exhaust cannot be installed.Other up type mufflers may interfere with the oil hose.
*Since an oil cooler is installed, a large capacity oil pump (Super Oil Pump Kit: 331-1413000) is recommended.
*The installation bracket may need to be changed or modified if the tank, clutch or other accessory parts are installed at the same time.
*Make sure to install the condenser according to the installation instructions.If the union nipple side is installed face down, the oil pressure will drop and the cylinder head will not be lubricated enough.
*The right side stock crankcase cover requires a tapped hole.
*Oil line access is on the right side crankcase cover.
*If you have installed a big bore kit, be sure to use it with the oil filter kit.
*Stock exhaust cannot be installed.Other up type exhausts may interfere with the oil hose.
*It is recommended to use with a large capacity oil pump.

Applicable Models

XR50 Motard (AD14) All models XR100MOTARD (HD13) All models

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all