Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
DYNAFamily 93-16 [Other Fitting Information]93-16 Dynamodel (except FLD)
Product Detail
Specification:
Manufacturer's Part Number: DY-1G
Color: gloss black
[Size]
●Height: Approx. 74mm
●Width: Approx. 225mm
●Height: Approx. 90mm
(The above sizes do not include the mounting bracket.)
●Fan diameter: Approx. 70mm
Color: gloss black
[Size]
●Height: Approx. 74mm
●Width: Approx. 225mm
●Height: Approx. 90mm
(The above sizes do not include the mounting bracket.)
●Fan diameter: Approx. 70mm
[Description]
This oil cooler system is equipped with dual fans.
When the temperature of the oil reaches about 100 degrees, the special thermo detects it and activates the fan, thus cooling the engine more efficiently.
The oil can be cooled without running.
It is waterproof and dustproof, and has been certified IP55.
It is especially recommended for those who often drive in the summer or in traffic jams.
This is an upgraded product equipped with a fan that has a higher air volume than the conventional product.
Please watch the video to see how it works.
When the temperature of the oil reaches about 100 degrees, the special thermo detects it and activates the fan, thus cooling the engine more efficiently.
The oil can be cooled without running.
It is waterproof and dustproof, and has been certified IP55.
It is especially recommended for those who often drive in the summer or in traffic jams.
This is an upgraded product equipped with a fan that has a higher air volume than the conventional product.
Please watch the video to see how it works.
Caution
*This product cannot be installed if the engine guard is installed.
*Not compatible with twin cooled vehicles (water-cooled) and FLD (switch-back).
*Please check the contents in the image.
*There is a slight difference in the contents depending on the lot.There is no problem in using it.
*LED light informs the rider when the fan is running.
*It is expected to delay the deterioration of oil performance as well as to prevent overheating.
*Oil filters for EVO cannot be used due to the interference.
*Make sure to use the oil filter for TC.
*Set the oil hose in a way that it does not interfere with the frame or wiring.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight.
*Therefore, the work must be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images.
*Neofactory cannot accept color specifications.
*Not compatible with twin cooled vehicles (water-cooled) and FLD (switch-back).
*Please check the contents in the image.
*There is a slight difference in the contents depending on the lot.There is no problem in using it.
*LED light informs the rider when the fan is running.
*It is expected to delay the deterioration of oil performance as well as to prevent overheating.
*Oil filters for EVO cannot be used due to the interference.
*Make sure to use the oil filter for TC.
*Set the oil hose in a way that it does not interfere with the frame or wiring.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight.
*Therefore, the work must be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images.
*Neofactory cannot accept color specifications.
Applicable Models
DYNAFamily 93-16 [Other Fitting Information]93-16 Dynamodel (except FLD)
