Check my coupons
Product Detail
Specification:
[Color] Black
[Material] Body/Aluminum Mounting bracket/Steel black paint finish
[Work time] 0.5h
[Size of ETC case] 920mm x 37mm x 154mm (The slightly longer design is for the key mechanism.)
[Board thickness] 2mm
[Components]
・ETC case
・Mounting bolt set
・Cushion spacer
・Key
・Instruction Manual
[ETC Compatible Models]
・Mitsuba Sankowa
・MSC-BE700S
・MSC-BE700E
・MSC-BE61W
・MSC-BE61
・MSC-BE51W
・MSC-BE51
(81mm x 22mm x 122.5mm)
[Material] Body/Aluminum Mounting bracket/Steel black paint finish
[Work time] 0.5h
[Size of ETC case] 920mm x 37mm x 154mm (The slightly longer design is for the key mechanism.)
[Board thickness] 2mm
[Components]
・ETC case
・Mounting bolt set
・Cushion spacer
・Key
・Instruction Manual
[ETC Compatible Models]
・Mitsuba Sankowa
・MSC-BE700S
・MSC-BE700E
・MSC-BE61W
・MSC-BE61
・MSC-BE51W
・MSC-BE51
(81mm x 22mm x 122.5mm)
[Description]
Isn't it difficult to pay at the toll booth with gloves on?In such cases, ETC is a very effective equipment.
If you leave your model with the card in the ETC unit and the card is stolen and used fraudulently, you are obligated to pay.
To protect ourselves, we must devise ways to prevent our ETC cards from being stolen.There!We've developed a "keyed" ETC case for motorcycles. We have developed a "lockable" ETC case for motorcycles.
[ETC case with key]
■Uses aluminum, which is lighter than steel
Strength is ensured by laser-cutting aluminum plates to a thickness of 2mm to provide adequate thickness.The surface is coated with a black semi-gloss finish to blend in with the vehicle body and resist rust.The OBE is exclusively designed by Mitsuba Sankowa (see Compatible Models), and the case size is made as compact as possible to fit almost perfectly in the case.
■Cushion spacers are also attached to reduce rattling
The key is a cylinder lock made by Tochigiya, which supplies parts for Aegis ships, jets, bullet trains to make the ETC case as small as possible, it is processed and installed even smaller than the original key.
■ Includes rubber grommets to protect wiring
Depending on the installation position, the OBE may rattle inside the ETC case.A single cushion spacer is included, so in case of rattling, the cushion spacer can be used for adjustment.
[Frequently asked questions are summarized here]
Q: How do I install it on my bike?
A: The case has four holes for bolts.Attach it to the bike body using the supplied low-head screws.
This is a universal product and may require additional parts for installation.
Q: If the lock is broken, should I buy a key made by Tochigiya?
A: The case is processed to be as small as possible.Therefore, Tochigiya's key cannot be used as it is.
Please contact us as we sell them as repair parts.
Q: Can it be used on rainy days?
A: Both MSC-BE51 (W) and MSC-BE700 (E) are waterproof.The MSC-BE51 (W) is IP55, the MSC-BE700 is IP66, and the MSC-BE700E is IP68.
If you are likely to use the MSC-BE700E in the rain, we recommend the MSC-BE700E because of its excellent waterproof performance.
If you leave your model with the card in the ETC unit and the card is stolen and used fraudulently, you are obligated to pay.
To protect ourselves, we must devise ways to prevent our ETC cards from being stolen.There!We've developed a "keyed" ETC case for motorcycles. We have developed a "lockable" ETC case for motorcycles.
[ETC case with key]
■Uses aluminum, which is lighter than steel
Strength is ensured by laser-cutting aluminum plates to a thickness of 2mm to provide adequate thickness.The surface is coated with a black semi-gloss finish to blend in with the vehicle body and resist rust.The OBE is exclusively designed by Mitsuba Sankowa (see Compatible Models), and the case size is made as compact as possible to fit almost perfectly in the case.
■Cushion spacers are also attached to reduce rattling
The key is a cylinder lock made by Tochigiya, which supplies parts for Aegis ships, jets, bullet trains to make the ETC case as small as possible, it is processed and installed even smaller than the original key.
■ Includes rubber grommets to protect wiring
Depending on the installation position, the OBE may rattle inside the ETC case.A single cushion spacer is included, so in case of rattling, the cushion spacer can be used for adjustment.
[Frequently asked questions are summarized here]
Q: How do I install it on my bike?
A: The case has four holes for bolts.Attach it to the bike body using the supplied low-head screws.
This is a universal product and may require additional parts for installation.
Q: If the lock is broken, should I buy a key made by Tochigiya?
A: The case is processed to be as small as possible.Therefore, Tochigiya's key cannot be used as it is.
Please contact us as we sell them as repair parts.
Q: Can it be used on rainy days?
A: Both MSC-BE51 (W) and MSC-BE700 (E) are waterproof.The MSC-BE51 (W) is IP55, the MSC-BE700 is IP66, and the MSC-BE700E is IP68.
If you are likely to use the MSC-BE700E in the rain, we recommend the MSC-BE700E because of its excellent waterproof performance.
Caution
*The images of products installed on bikes are for illustrative purposes only.As for the key, My Lock locks are used, but now due to specification changes, cylinder locks are used as shown in the product image.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Universal
