Buy Original BRISK : BRISK LGS Plug [AOR12LGS] :model

Specification:

[Quantity] 1pc.
[Size]
Screw Diameter 10mm
Reach 19mm
Plug Wrench Size16mm
[Shape] Terminal Separate Type
[NGK Correspondence] CR8E, CR9E, CR10E, CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EK, CR9EK, CR10EK, CR8EIX, CR9EIX

[Description]

With resistance (Resistor type)
In the vehicle where the tuning of the ignition system is done by Utani SP-2 etc., the effect such as the acceleration, the vibration reduction, and the flat torque characteristic, etc. will be realized as an amazing feeling difference immediately after the plug is changed.
Especially, it shows the overwhelming performance in the high comp high tuned engine.About the vehicle after 2000, because the stock ignition system tends to have enough ability, it tends to be able to function.
However, we have not verified all the vehicles, so please contact us for more information.

In comparison with the ZC/ZS type, the LGS type has better performance in the mid-to-high RPM range power band, while the ZC/ZS type has better flat characteristics in the low and mid RPM range, so please choose according to your application and preference.

NGK C plug.
Compatibility with NGK plugs is as follows, heat value correspondence is from No. 8 to No. 10.
CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EIX, CR9EIX

Note

* This item can not be cancelled, returned nor exchange after placing an order.

Caution

*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition system tuned bikes - available.
*Ignition system stock bikes - Not available
*Fully transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition bikes, Brisk ZC/ZS type is applicable.
*Images are for reference only.The product is sold by the unit of one bottle.
*Resistor type (with resistor).
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*Refer to the NGK plug list for compatibility.All the mounting threads with a diameter of 10mm and a length of 19mm have compatibility.
*The tightening torque is 0.9kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

BRISK LGS Plug [AOR12LGS]

Product Detail

Specification:

[Description]

Note

Caution

ALSO VIEWED PRODUCTS

BRISK LGS Plug [AOR12LGS]

Product Detail

Specification:

[Description]

Note

Caution

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

New Custom Article

Apply Coupon

Image Review

Review detail