- Home
- Motorcycle Parts
- Electrical
- Lights
- Turn Signal Bulb
- SP Takegawa
- SP Takegawa: Orange LED Blinker Bulb
Orange LED Blinker Bulb
- Product number: 05-08-0445
-
- IN STOCK
- Out Stock
- SP Takegawa
- |
- 3.5
- (11 reviews)
Check my coupons
Product Detail
Specification:
[Corresponding Electric Shape]
Glass Shape: G18
Opened Shape: BA15S (Parallel Pin)
Quantity: 1 Set of 2pcs.
Glass Shape: G18
Opened Shape: BA15S (Parallel Pin)
Quantity: 1 Set of 2pcs.
[Description]
The indicator bulb can be easily converted to LED and the power consumption can be greatly reduced.
By changing the indicator bulb to LED, you can greatly reduce the power consumption and it will become a light emission with a good response characteristic of LED.
This LED indicator bulb is designed for bikes with a stock indicator bulb of G18 BA15S (parallel pin), and requires SP Takegawa's Wide Range Flasher Relay to be installed at the same time.
By installing 1 high luminosity LED on the front of the LED bulb and 8 surface emitting type LED on the side, we have achieved both excellent visibility and light emission that can make use of the reflection of the reflector.
The size of the LED bulb is smaller than the G18 glass bulb type, so the light emitting part can be installed without interfering with the blinker that can be installed with the G18 glass bulb.
By downsizing the valve, it can be used for a wide range of models.
■List of SP Takegawa's Blinkers (Parallel Pins) that can be installed at the same time
・HONDA stock square type indicator lens kit (05-08-0266, 05-08-0267, 05-08-0268, 05-08-0284)
・HONDA stock square type indicator inner reflector (05-08-0214)
・Clear Blinker Lens (09-03-098)
・Various types of blaze indicators (09-03-0035, 09-03-1100, 09-03-1101)
・Blinker Inner Reflector (05-08-0072)
・Machined aluminum indicator kits (A, B, C types, all including universal)
・Round S/Circular M/Square S Blinker Kit (all including universal)
・All types of streamline indicator (including universal) *Except for type 2.
By changing the indicator bulb to LED, you can greatly reduce the power consumption and it will become a light emission with a good response characteristic of LED.
This LED indicator bulb is designed for bikes with a stock indicator bulb of G18 BA15S (parallel pin), and requires SP Takegawa's Wide Range Flasher Relay to be installed at the same time.
By installing 1 high luminosity LED on the front of the LED bulb and 8 surface emitting type LED on the side, we have achieved both excellent visibility and light emission that can make use of the reflection of the reflector.
The size of the LED bulb is smaller than the G18 glass bulb type, so the light emitting part can be installed without interfering with the blinker that can be installed with the G18 glass bulb.
By downsizing the valve, it can be used for a wide range of models.
■List of SP Takegawa's Blinkers (Parallel Pins) that can be installed at the same time
・HONDA stock square type indicator lens kit (05-08-0266, 05-08-0267, 05-08-0268, 05-08-0284)
・HONDA stock square type indicator inner reflector (05-08-0214)
・Clear Blinker Lens (09-03-098)
・Various types of blaze indicators (09-03-0035, 09-03-1100, 09-03-1101)
・Blinker Inner Reflector (05-08-0072)
・Machined aluminum indicator kits (A, B, C types, all including universal)
・Round S/Circular M/Square S Blinker Kit (all including universal)
・All types of streamline indicator (including universal) *Except for type 2.
Caution
*Image 2 shows a comparison of luminance, left: Stock, right: LED.
*Cannot be installed on battery-less vehicles.
*You will need SP Takegawa's wide range flasher relay for LED.
*If the stock indicator body, the reflector in the indicator unit, or the lens cut of the indicator is not suitable for the LED bulb, the irradiation angle and brightness will be insufficient, which may violate the Road Vehicles Act.Please check the blinker you are using before purchasing.
*The electrodes of this product are set high so that the crimping force of the socket fitting part will be high.If it cannot be pushed into the indicator side socket due to individual differences of the bikes, use sandpaper to slightly sharpen the tip of the electrode.
*Optional parts may not be able to be installed even if the number of poles is the same, depending on the bike, mounting position and mounting shape.Please check the relay in your bike before purchasing.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*Cannot be installed on battery-less vehicles.
*You will need SP Takegawa's wide range flasher relay for LED.
*If the stock indicator body, the reflector in the indicator unit, or the lens cut of the indicator is not suitable for the LED bulb, the irradiation angle and brightness will be insufficient, which may violate the Road Vehicles Act.Please check the blinker you are using before purchasing.
*The electrodes of this product are set high so that the crimping force of the socket fitting part will be high.If it cannot be pushed into the indicator side socket due to individual differences of the bikes, use sandpaper to slightly sharpen the tip of the electrode.
*Optional parts may not be able to be installed even if the number of poles is the same, depending on the bike, mounting position and mounting shape.Please check the relay in your bike before purchasing.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/