Check my coupons
Product Detail
Specification:
Color: Black, Orange
Connections: USB power
Made in the USA: yes
Model: Power Commander V
Programming: 2 positions
Specific applications: yes
Style: replacement
Type: fuel management system
[Function]
・About half the size of the Power Commander
・Can be connected to PC via USB port
・Two types of power maps can be stored
・Maps can be configured for each gear and engine cylinder
・Fuel can be adjusted from -100% to +250%
・Connected to PC, easy map setting by file
・Basic maps and maps of each exhaust manufacturer can be downloaded free of charge from the manufacturer's website for each vehicle.
[effect]
・Increased low-speed torque
・Power Up
・Reduce engine load by optimizing fuel consumption
Click here for maps for each model
http: //www.powercommander.com/powercommander/maplookup/powercommander_map_lookup.aspx
Connections: USB power
Made in the USA: yes
Model: Power Commander V
Programming: 2 positions
Specific applications: yes
Style: replacement
Type: fuel management system
[Function]
・About half the size of the Power Commander
・Can be connected to PC via USB port
・Two types of power maps can be stored
・Maps can be configured for each gear and engine cylinder
・Fuel can be adjusted from -100% to +250%
・Connected to PC, easy map setting by file
・Basic maps and maps of each exhaust manufacturer can be downloaded free of charge from the manufacturer's website for each vehicle.
[effect]
・Increased low-speed torque
・Power Up
・Reduce engine load by optimizing fuel consumption
Click here for maps for each model
http: //www.powercommander.com/powercommander/maplookup/powercommander_map_lookup.aspx
[Description]
・Fuel control for each individual cylinder in a smaller enclosure
・Warm-up fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced "accel pump" utility
・Made in the U.S.A.
[Translation]
・Fuel control for each individual cylinder in a small enclosure
・Warm-up fuel adjustment (a unit that reads engine temperature and allows fuel / timing adjustments based on the reading)
・Size reduction from PCIII USB
・Easy to install
・USB supplied from computer; 9 volt adapter is no longer needed
・Built-in 2-position map switching function
・Single Pole Single Throw (SPST) switch is added to switch between two different fuel maps
・Gear / speed input allows for gear-based map adjustment
・Using analog inputs, 0-5V sensors can be installed
・Create an adjustment table based on analog inputs such as boost or temperature
・The Power Commander V can map each cylinder individually.
・More tuning range than PCIII USB
・Enhanced "acceleration pump" utility
・Made in USA
・Warm-up fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced "accel pump" utility
・Made in the U.S.A.
[Translation]
・Fuel control for each individual cylinder in a small enclosure
・Warm-up fuel adjustment (a unit that reads engine temperature and allows fuel / timing adjustments based on the reading)
・Size reduction from PCIII USB
・Easy to install
・USB supplied from computer; 9 volt adapter is no longer needed
・Built-in 2-position map switching function
・Single Pole Single Throw (SPST) switch is added to switch between two different fuel maps
・Gear / speed input allows for gear-based map adjustment
・Using analog inputs, 0-5V sensors can be installed
・Create an adjustment table based on analog inputs such as boost or temperature
・The Power Commander V can map each cylinder individually.
・More tuning range than PCIII USB
・Enhanced "acceleration pump" utility
・Made in USA
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The instruction manual is in English.
*We do not accept any after-sales service or inquiry for setting and installation method.
*Delivery may be delayed due to importing.
*We do not accept any after-sales service or inquiry for setting and installation method.
*Delivery may be delayed due to importing.