- Home
- Model
- KAWASAKI 251 - 400cc
- NINJA400 (2014-)
- Motorcycle Parts
- Bodyworks
- Fairings
- Under Cowl / Belly Pans
- A-TECH
- A-TECH: Under Cowl Inner Tray
Check my coupons
Product Detail
Specification:
[Component]
Rubber cap X2 pcs
Heat insulator X 1pc
Rubber cap X2 pcs
Heat insulator X 1pc
[Description]
Compatible with stock under cowl only.
It is compatible with the stock exhaust.
Side stand can be usedIt is in the form of an oil tray.
To install, set it inside the stock under cowl and tighten together with the under cowl.
It is compatible with the stock exhaust.
Side stand can be usedIt is in the form of an oil tray.
To install, set it inside the stock under cowl and tighten together with the under cowl.
Note
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*If the product interferes with the exhaust, please modify it by yourself.
*Carbon KV is a made-to-order product.
*The product in the image is made of twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*If the product interferes with the exhaust, please modify it by yourself.
*Carbon KV is a made-to-order product.
*The product in the image is made of twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/