- Home
- Model
- SUZUKI 751 - 1000cc
- GSX-R1000 (Gixxer ,GSXR)
- Motorcycle Parts
- Brakes
- Brake Caliper Brackets
- m-tech
- m-tech: Rear Caliper Support
Check my coupons
Product Detail
Specification:
Caliper support for CNC calipers
Compatible year: 2005 (K5) 2006 (K6) models
Compatible calipers: Brembo CNC P2 P / No.120.A441.10-40
Mounting pitch: 84mm
Compatible Disc Size: Φ220mm
[Set components]
・Main Unit x 1
・User's Manual x 1
・Safety Precautions x 1
・Sticker x 1
Compatible year: 2005 (K5) 2006 (K6) models
Compatible calipers: Brembo CNC P2 P / No.120.A441.10-40
Mounting pitch: 84mm
Compatible Disc Size: Φ220mm
[Set components]
・Main Unit x 1
・User's Manual x 1
・Safety Precautions x 1
・Sticker x 1
[Description]
Basically, it is designed for stock model, so you can install stock wheels and stock discs.
It is recommended to change the R master size to 1/2 size to improve the controllability.
It is recommended to change the R master size to 1/2 size to improve the controllability.
Caution
*This product is for racing use only.
*Tighten the caliper to a torque of 22N-m to 24N-m.
*Please purchase caliper, brake hose and two M8 x 20mm bolts separately.
*When installing the caliper support, hold the gap of the stopper part of the caliper support body so that it touches the lower part of the vehicle and tighten the R axle.
*If you are using some aftermarket rotors, please check if there is any interference with the floating pin, etc. If there is any interference, you may need to shave the pad contact surface.
*Please pay attention to the routing of the brake hose.
The recommended size of the master cylinder is 1/2.
Standard size brakes tend to have too much tension.
Installation by qualified personnel is mandatory.It is dangerous to install this product without careful consideration.
*Image may contain other colors.
*Tighten the caliper to a torque of 22N-m to 24N-m.
*Please purchase caliper, brake hose and two M8 x 20mm bolts separately.
*When installing the caliper support, hold the gap of the stopper part of the caliper support body so that it touches the lower part of the vehicle and tighten the R axle.
*If you are using some aftermarket rotors, please check if there is any interference with the floating pin, etc. If there is any interference, you may need to shave the pad contact surface.
*Please pay attention to the routing of the brake hose.
The recommended size of the master cylinder is 1/2.
Standard size brakes tend to have too much tension.
Installation by qualified personnel is mandatory.It is dangerous to install this product without careful consideration.
*Image may contain other colors.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/