Check my coupons
Product Detail
Specification:
For LED turn signal specification with CANBUS (front / rear)
[Description]
[For Harley bikes]
If your bike is equipped with CANBUS, the turn signals will light up as usual even if you change to LED turn signals.
However, the indicator on the meter will be in a high-flux state.
resistor recommended for those who are concerned about indicator high-flux.
Available for bikes whose stock turn signals are 12V LED (stock LED → Kellermann LED).
If the stock turn signal uses halogen bulbs, please use the resistor for halogen type even if your bike is equipped with CANBUS.
[For other bikes]
Available for bikes whose stock turn signals are 12V LED (stock LED → Kellermann LED).
If the replacement of the Kellermann turn signal does not work properly, please use it.
If the stock turn signal uses halogen bulbs, please use the resistor for halogen type even if your bike is equipped with CANBUS.
If your bike is equipped with CANBUS, the turn signals will light up as usual even if you change to LED turn signals.
However, the indicator on the meter will be in a high-flux state.
resistor recommended for those who are concerned about indicator high-flux.
Available for bikes whose stock turn signals are 12V LED (stock LED → Kellermann LED).
If the stock turn signal uses halogen bulbs, please use the resistor for halogen type even if your bike is equipped with CANBUS.
[For other bikes]
Available for bikes whose stock turn signals are 12V LED (stock LED → Kellermann LED).
If the replacement of the Kellermann turn signal does not work properly, please use it.
If the stock turn signal uses halogen bulbs, please use the resistor for halogen type even if your bike is equipped with CANBUS.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*This product is a universal product (for 12V plus control specification bikes).Depending on bike specifications, conditions, and individual differences, the product may not be compatible and may require modification or addition of parts, or may not be able to be installed.
*This product can be used for bikes with 12V LED indicators (stock LED → Kellermann LED).
*If your stock blinkers are halogen bulbs, please use the register for halogen specification even if your bike is equipped with CANBUS.
*1 for the front and 1 for the rear are required.
*For Kellermann blinkers plus taillights / brake lights (including DF series combined in one), i.BOS - CL1 (part number:Please purchase KM123-942).
*The actual product may differ in some colors and shapes due to improvements and specification changes.
*For the convenience of photography, other products may also appear in the image, but only the item in the title will be delivered.
*There may be changes in product specifications due to the manufacturer's reasons.
*This product can be used for bikes with 12V LED indicators (stock LED → Kellermann LED).
*If your stock blinkers are halogen bulbs, please use the register for halogen specification even if your bike is equipped with CANBUS.
*1 for the front and 1 for the rear are required.
*For Kellermann blinkers plus taillights / brake lights (including DF series combined in one), i.BOS - CL1 (part number:Please purchase KM123-942).
*The actual product may differ in some colors and shapes due to improvements and specification changes.
*For the convenience of photography, other products may also appear in the image, but only the item in the title will be delivered.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Universal
