Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
ZX-10R 16-20
Z1000 (water-cooled) 09-12
ZX-6R ZX-636R
ZX-6R 13-16
ZX-6R 03-08
Z750 (water-cooled) 07-11
NINJA650R 12-16
Show more
CBR600RR 07-21
CBR600F All years 4i
CBR600F All years 4
CBR1000RR 04-20
RC51 All ALL MODEL
Show more
YZF-R6 01-21
YZF-R1 02-14
MT-09 14-21
MT-07 15-21
YZF-R6 06-09 S
YZF-R3 15-21 North American Spec Only
FZ6R ALL MODEL
MT-09 14-21 FZ-09
MT-07 15-21 FZ-07
Show more
Product Detail
Specification:
・2-Pin LED Flasher Relay
[Description]
This relay will fix your flash rate problem caused by aftermarket signal lights and / or integrated taillight.
If your signal lights flash too fast or do not flash, this part is your solution!
Plug and play - easy installation.
This component works with the following signal configurations:
All stock
Stock taillight, aftermarket signals
Integrated taillight, stock signals
Integrated taillight, aftermarket signals.
The relay comes preset to 85 cycles per minute.
You can alter the flash rate to make it faster or slower.
If you slip off the grey cover you can access an adjuster that will enable you to change the flash rate to your liking.
If your signal lights flash too fast or do not flash, this part is your solution!
Plug and play - easy installation.
This component works with the following signal configurations:
All stock
Stock taillight, aftermarket signals
Integrated taillight, stock signals
Integrated taillight, aftermarket signals.
The relay comes preset to 85 cycles per minute.
You can alter the flash rate to make it faster or slower.
If you slip off the grey cover you can access an adjuster that will enable you to change the flash rate to your liking.
Caution
*The instruction manual, if included, will be in English.
Make sure that your motorcycle uses a 2-pin relay for the signal system.If your motorcycle has a hazard light, you may need a 4-pin relay.Also note the pinout and make sure it matches the one on your motorcycle to make sure it fits before you buy.
Make sure that your motorcycle uses a 2-pin relay for the signal system.If your motorcycle has a hazard light, you may need a 4-pin relay.Also note the pinout and make sure it matches the one on your motorcycle to make sure it fits before you buy.
Applicable Models
ZX-10R 16-20
Z1000 (water-cooled) 09-12
ZX-6R ZX-636R
ZX-6R 13-16
ZX-6R 03-08
Z750 (water-cooled) 07-11
NINJA650R 12-16
Show more
CBR600RR 07-21
CBR600F All years 4i
CBR600F All years 4
CBR1000RR 04-20
RC51 All ALL MODEL
Show more
YZF-R6 01-21
YZF-R1 02-14
MT-09 14-21
MT-07 15-21
YZF-R6 06-09 S
YZF-R3 15-21 North American Spec Only
FZ6R ALL MODEL
MT-09 14-21 FZ-09
MT-07 15-21 FZ-07
Show more