Check my coupons
Product Detail
Specification:
Weight: 0.5kg
[Description]
By interrupting to the stock ECU of the Grom (JC75), excellent ignition timing control and fuel control performance can be achieved.
It becomes possible to cancel the engine limiter, and to change various ignition / fuel settings that were not possible until now.
In addition, in the O2 sensor feedback area, even if you increase or decrease the amount of fuel by the conventional performance chip, the O2 feedback function will restore the fuel condition. without the error warning (FI lamp) coming on.
The control response of the Type V is greatly improved compared with the conventional Fire Plus, and any volume increase / decrease can be performed as you imagine.
Installation is a simple one-touch operation by simply inserting the coupler into the ECU.
The Enigma FirePlus type-V can be operated from a PC via a wireless connection using free Enigma FirePlus type-V software.
All operations can be performed from the application for iOS (iPhone) or Android.(The application for smartphones will be charged)
Please download the software or application from the link on the DILTS JAPAN download page.
It is a coupler-on type that can be connected to the ECU of 2017 or later Grom (JC75) with one touch.
Simply plug the coupler into the stock ECU located on the lower left side of the gas tank to complete the installation process.
Once installed, all operations can be easily performed via wireless connection from a smartphone or PC.
Bluetooth / Bluetooth LE connection model Compatible with both Android and iOS.
*Click here for the latest smartphone support information.
It can be connected to Android devices, iOS devices and Windows PC.No connection to MAC.
The same fuel map can be shared between a PC and a smartphone via Enigma FirePlus.
The dedicated Enigma FirePlus type-V operating software / instructions can be downloaded to your PC free of charge from the DILTS JAPAN website.
Download the basic app (free) from the App Store for iOS and Google Play for Android.
After that, select and download the "Model Data () " for each model.
You can use it with basic application + model (GROM JC75) data.(Please refer to the instruction manual for details)
*If you have multiple bikes, you can register multiple "model data" in one basic application on your phone.
*Once you have purchased a vehicle model application, you cannot change it, so please read each description screen carefully to make sure you are doing the right thing.
*Apps purchased once can be re-downloaded for free if registered with the same ID even after a change of handset.
[Key Features of the ENIGMA FirePlus Type V]
(1) Release both engine speed limiter and ignition limiter by interrupting the data of stock electronic control ECU.
Over 12,000 rpm can be done.
You can easily unlock / set your phone from your phone or PC.
It cuts the limiter of about 9500rpm of Grom (JC75).
(2) It is possible to change the ignition timing and the dwell time.
As for the ignition timing, "PRO mode" that writes all the ignition timing to the map as well as "EASY mode" that can set the advance angle / the delay angle to the stock ignition timing can be selected.
Since the dwell time can be changed, you can get the best performance out of the big coil.
The ignition timing can be finely controlled by the throttle position and engine speed.
Easy to set up on the go with your phone.
(3) Further improvement of fuel injection volume increase / reduction performance.
Fuel adjustment can be finely controlled by throttle position and engine speed.
Increasing / decreasing capacity is further improved from the conventional 2500μs / -7500μs, and the maximum capacity is 4000μs / reducing capacity is -7500μs.
Easy to set up on your phone.
In addition, if the injector is left blowing at high rpm, it may cause a serious failure.
For this reason, we added a function to display the injection ratio of injectors.You can check the usage rate at any time on your smartphone or PC screen.
*Injector injection rates of 98-100% can cause serious failures.
(4) O2 feedback stop
The feedback correction area of the GROM JC75 is wider than that of the conventional JC61, and even if the fuel is increased or decreased by the performance-chip, it will be restored by the feedback correction within this area.
The feedback stop function newly developed for type-V stops the O2 feedback function (closed loop) without going into the error mode (FI lamp lights up).
This eliminates the feedback fuel correction and the O2 sensor correction for fuel increase / decrease in all engine speed range and all accelerator opening range.
It is especially effective for the fuel condition of the GROM JC75 which has a large feedback area.
Since the ECU monitors the feedback status of the GROM JC75, the ECU detects the increase / decrease in the amount and the FI warning light comes on when the amount is increased / decreased by the conventional performance-chip.
The type-V uses a unique technology to stop feedback, so it will not go into error mode (FI lamp lights up).
The FI light will only come on "when there is a real problem" to let you know that your precious bike is in trouble.
(5) Real search function installed
You can connect to your PC or smartphone with the engine running.
The information of the running engine is reflected on the screen of PC or smart phone in real time.
The RPM, the throttle opening degree, and the injector opening / closing ratio that are being read now are reflected in the fuel MAP graph, and it is possible to confirm it, and the adjustment part can be understood immediately, and the setting becomes very easy.
In particular, due to the greatly improved performance of the injector, there is a case that "the injector volume increases more than the performance of the injector" is set at high rpm.
If the injector open / close ratio reaches 97-98%, it means that the performance of the injector has reached its limit.(If not, it may cause the injector to fail)
Do you need bigger injectors?It can also be used as a criterion for determining.
(6) Pit-in speed limiter function
This is an independent twin limiter function separate from the engine speed rev limiter.
You can control the speed of the PIT lane in the circuit.Enter the engine speed into ENIGMA to achieve the specified speed at your desired gear.
Install a commercially available switch or similar device at a location of your choice and connect it to the ENIGMA wiring.
The speed is controlled to the specified engine speed only when the external switch is "ON".
(7) Rev limit function
You can set the upper limit of the engine speed.It is a separate function from the limiter cut, so it can be set at low rpm.
It can be used as a rev countermeasure for tuned engines or when you don't want to increase the engine speed.
Easy on / off setting from your smartphone.
(8) Digital acceleration pump
This product takes in the TPS signal and monitors the accelerator opening degree and its speed.
When the accelerator pedal is opened quickly, the system judges that the rider wants quick acceleration and performs acceleration injection asynchronously in addition to the incremental injection set at the moment the accelerator pedal is opened.
It can be set to work in the same way as the "acceleration pump" of a racing carburetor.
(9) Oil temperature display function
There is a real-time monitoring function in the dedicated software for PC / phone.
In addition to the tachometer screen and throttle opening graph screen, which are very useful for setting, the engine oil temperature is also displayed digitally.
The oil temperature gauge moves in real time when the engine is running.
If your vehicle does not have an oil temperature gauge, your smartphone can replace the tachometer and oil temperature gauge.
(10) TPS sensor signal correction function
The output of the TPS sensor (usually between 0. 8v and 4. 2v) varies from bike to bike.
By correcting the error of the signal input to ENIGMA according to the machine to be used because it can be checked from the screen of PC / Smart phone, the accelerator opening degree of the motorcycle is accurately reflected to this machine, and the numerical data of the fuel MAP made is accurately reflected to the motorcycle.
Communicating with the software, you can check if the wiring connections are correct.
(11) The fuel MAP and the acceleration pump data can be saved to PC / phone independently as many as you want.
Since each data is independent, you can easily combine them in various ways. For example, you can create multiple power MAPs and fuel consumption MAPs and transfer them to ENIGMA easily on the spot with your smartphone according to the situation.
The fuel tone MAP made by the smart phone can be imported (saved) to the personal computer through ENIGMA.
You can transfer the MAP edited on the PC to ENIGMA, and to send it from ENIGMA to the smart phone.You can also save it.
(12) Unauthorized communication connection prevention function
ENIGMA (Bluetooth version) is equipped with a safety device that enables communication by emitting a radio wave only when the key is turned on at full throttle to prevent others from accessing it by mischief, since data is exchanged wirelessly.
If you start the vehicle with the normal key on, it will not emit any radio waves, so a third party will not be able to access your ENIGMA.(The FI lamp on the bike will flash only when it emits a radio signal to notify you)
In addition, the ENIGMA communication connection is only available to one unit, so third party intrusion is not allowed even when the customer is communicating (for example, while driving using the tachometer function).
Usually, when you change the data, if you turn off the key and then turn on the key without opening the accelerator, the radio wave will not be emitted.
(13) With digital output service line.
One pulse per revolution is 5 volts.
It is compatible with many digital tachometers on the market.
If you use this output wire, you will get an accurate reading, while the type that wraps around the ignition cord will show an inaccurate RPM depending on how it is wrapped.
It is a service line that can be used for many other things.
(14) This unit is waterproof for daily life.
(Generally, it's OK to get rainwater on it)
Do not submerge the product completely in water or use it in such a way that it is subjected to water intermittently.
It is designed to be installed around the stock ECU.Do not drop the product or give it a strong shock.
This may cause a major malfunction / trouble.
It becomes possible to cancel the engine limiter, and to change various ignition / fuel settings that were not possible until now.
In addition, in the O2 sensor feedback area, even if you increase or decrease the amount of fuel by the conventional performance chip, the O2 feedback function will restore the fuel condition. without the error warning (FI lamp) coming on.
The control response of the Type V is greatly improved compared with the conventional Fire Plus, and any volume increase / decrease can be performed as you imagine.
Installation is a simple one-touch operation by simply inserting the coupler into the ECU.
The Enigma FirePlus type-V can be operated from a PC via a wireless connection using free Enigma FirePlus type-V software.
All operations can be performed from the application for iOS (iPhone) or Android.(The application for smartphones will be charged)
Please download the software or application from the link on the DILTS JAPAN download page.
It is a coupler-on type that can be connected to the ECU of 2017 or later Grom (JC75) with one touch.
Simply plug the coupler into the stock ECU located on the lower left side of the gas tank to complete the installation process.
Once installed, all operations can be easily performed via wireless connection from a smartphone or PC.
Bluetooth / Bluetooth LE connection model Compatible with both Android and iOS.
*Click here for the latest smartphone support information.
It can be connected to Android devices, iOS devices and Windows PC.No connection to MAC.
The same fuel map can be shared between a PC and a smartphone via Enigma FirePlus.
The dedicated Enigma FirePlus type-V operating software / instructions can be downloaded to your PC free of charge from the DILTS JAPAN website.
Download the basic app (free) from the App Store for iOS and Google Play for Android.
After that, select and download the "Model Data () " for each model.
You can use it with basic application + model (GROM JC75) data.(Please refer to the instruction manual for details)
*If you have multiple bikes, you can register multiple "model data" in one basic application on your phone.
*Once you have purchased a vehicle model application, you cannot change it, so please read each description screen carefully to make sure you are doing the right thing.
*Apps purchased once can be re-downloaded for free if registered with the same ID even after a change of handset.
[Key Features of the ENIGMA FirePlus Type V]
(1) Release both engine speed limiter and ignition limiter by interrupting the data of stock electronic control ECU.
Over 12,000 rpm can be done.
You can easily unlock / set your phone from your phone or PC.
It cuts the limiter of about 9500rpm of Grom (JC75).
(2) It is possible to change the ignition timing and the dwell time.
As for the ignition timing, "PRO mode" that writes all the ignition timing to the map as well as "EASY mode" that can set the advance angle / the delay angle to the stock ignition timing can be selected.
Since the dwell time can be changed, you can get the best performance out of the big coil.
The ignition timing can be finely controlled by the throttle position and engine speed.
Easy to set up on the go with your phone.
(3) Further improvement of fuel injection volume increase / reduction performance.
Fuel adjustment can be finely controlled by throttle position and engine speed.
Increasing / decreasing capacity is further improved from the conventional 2500μs / -7500μs, and the maximum capacity is 4000μs / reducing capacity is -7500μs.
Easy to set up on your phone.
In addition, if the injector is left blowing at high rpm, it may cause a serious failure.
For this reason, we added a function to display the injection ratio of injectors.You can check the usage rate at any time on your smartphone or PC screen.
*Injector injection rates of 98-100% can cause serious failures.
(4) O2 feedback stop
The feedback correction area of the GROM JC75 is wider than that of the conventional JC61, and even if the fuel is increased or decreased by the performance-chip, it will be restored by the feedback correction within this area.
The feedback stop function newly developed for type-V stops the O2 feedback function (closed loop) without going into the error mode (FI lamp lights up).
This eliminates the feedback fuel correction and the O2 sensor correction for fuel increase / decrease in all engine speed range and all accelerator opening range.
It is especially effective for the fuel condition of the GROM JC75 which has a large feedback area.
Since the ECU monitors the feedback status of the GROM JC75, the ECU detects the increase / decrease in the amount and the FI warning light comes on when the amount is increased / decreased by the conventional performance-chip.
The type-V uses a unique technology to stop feedback, so it will not go into error mode (FI lamp lights up).
The FI light will only come on "when there is a real problem" to let you know that your precious bike is in trouble.
(5) Real search function installed
You can connect to your PC or smartphone with the engine running.
The information of the running engine is reflected on the screen of PC or smart phone in real time.
The RPM, the throttle opening degree, and the injector opening / closing ratio that are being read now are reflected in the fuel MAP graph, and it is possible to confirm it, and the adjustment part can be understood immediately, and the setting becomes very easy.
In particular, due to the greatly improved performance of the injector, there is a case that "the injector volume increases more than the performance of the injector" is set at high rpm.
If the injector open / close ratio reaches 97-98%, it means that the performance of the injector has reached its limit.(If not, it may cause the injector to fail)
Do you need bigger injectors?It can also be used as a criterion for determining.
(6) Pit-in speed limiter function
This is an independent twin limiter function separate from the engine speed rev limiter.
You can control the speed of the PIT lane in the circuit.Enter the engine speed into ENIGMA to achieve the specified speed at your desired gear.
Install a commercially available switch or similar device at a location of your choice and connect it to the ENIGMA wiring.
The speed is controlled to the specified engine speed only when the external switch is "ON".
(7) Rev limit function
You can set the upper limit of the engine speed.It is a separate function from the limiter cut, so it can be set at low rpm.
It can be used as a rev countermeasure for tuned engines or when you don't want to increase the engine speed.
Easy on / off setting from your smartphone.
(8) Digital acceleration pump
This product takes in the TPS signal and monitors the accelerator opening degree and its speed.
When the accelerator pedal is opened quickly, the system judges that the rider wants quick acceleration and performs acceleration injection asynchronously in addition to the incremental injection set at the moment the accelerator pedal is opened.
It can be set to work in the same way as the "acceleration pump" of a racing carburetor.
(9) Oil temperature display function
There is a real-time monitoring function in the dedicated software for PC / phone.
In addition to the tachometer screen and throttle opening graph screen, which are very useful for setting, the engine oil temperature is also displayed digitally.
The oil temperature gauge moves in real time when the engine is running.
If your vehicle does not have an oil temperature gauge, your smartphone can replace the tachometer and oil temperature gauge.
(10) TPS sensor signal correction function
The output of the TPS sensor (usually between 0. 8v and 4. 2v) varies from bike to bike.
By correcting the error of the signal input to ENIGMA according to the machine to be used because it can be checked from the screen of PC / Smart phone, the accelerator opening degree of the motorcycle is accurately reflected to this machine, and the numerical data of the fuel MAP made is accurately reflected to the motorcycle.
Communicating with the software, you can check if the wiring connections are correct.
(11) The fuel MAP and the acceleration pump data can be saved to PC / phone independently as many as you want.
Since each data is independent, you can easily combine them in various ways. For example, you can create multiple power MAPs and fuel consumption MAPs and transfer them to ENIGMA easily on the spot with your smartphone according to the situation.
The fuel tone MAP made by the smart phone can be imported (saved) to the personal computer through ENIGMA.
You can transfer the MAP edited on the PC to ENIGMA, and to send it from ENIGMA to the smart phone.You can also save it.
(12) Unauthorized communication connection prevention function
ENIGMA (Bluetooth version) is equipped with a safety device that enables communication by emitting a radio wave only when the key is turned on at full throttle to prevent others from accessing it by mischief, since data is exchanged wirelessly.
If you start the vehicle with the normal key on, it will not emit any radio waves, so a third party will not be able to access your ENIGMA.(The FI lamp on the bike will flash only when it emits a radio signal to notify you)
In addition, the ENIGMA communication connection is only available to one unit, so third party intrusion is not allowed even when the customer is communicating (for example, while driving using the tachometer function).
Usually, when you change the data, if you turn off the key and then turn on the key without opening the accelerator, the radio wave will not be emitted.
(13) With digital output service line.
One pulse per revolution is 5 volts.
It is compatible with many digital tachometers on the market.
If you use this output wire, you will get an accurate reading, while the type that wraps around the ignition cord will show an inaccurate RPM depending on how it is wrapped.
It is a service line that can be used for many other things.
(14) This unit is waterproof for daily life.
(Generally, it's OK to get rainwater on it)
Do not submerge the product completely in water or use it in such a way that it is subjected to water intermittently.
It is designed to be installed around the stock ECU.Do not drop the product or give it a strong shock.
This may cause a major malfunction / trouble.
Caution
*This product is not compatible with 2015 and 2016 GROM (EBJ-JC61).
*WARNING!!!Make sure you read it!
・This product is intended for use in competition and racing.
・Use of the product is entirely at the customer's own risk, from installation to use.
・DILTS JAPAN is not responsible for any damage caused by the use of this product. If used improperly, the engine can be seriously damaged.
・DILTS JAPAN shall not be liable for any damage caused by the act of a third party who installs the product or other accidents, or by the intentional or negligent misuse of the product by the customer.
・DILTS JAPAN shall not be liable for any incidental or consequential damages arising out of the use or inability to use this product.
・This product is not related to any knowledge of how to use a computer, Windows, or download a smartphone.
・The operation method of your computer or smartphone depends on the model you are using. Please consult a specialist or the shop where you purchased the product.
・Please do not use this product if you are not able to do so or do not know how to do so.(Please ask a specialist shop)
・Please make sure that your iOS device supports Bluetooth 4.0LE (iPhone4s or later, ipad 3rd generation or later) before you purchase.
・If you are using an Android device, please make sure that your Android device is compatible with this app before purchasing.
・Also, Android devices without built-in Bluetooth function cannot be connected.
*For customers who have a PC without built-in BlueTooth and want to use an aftermarket Bluetooth adapter with a USB connector.
・DILTS JAPAN products work only with Windows standard Bluetooth function and driver.
・All of the aftermarket products of various manufacturers cannot be used, because they are operated by different drivers of each manufacturer.
・If you are using a USB Bluetooth adapter, please use the Bluetooth device and Bluetooth driver on the Windows standard control panel without installing the software supplied by the manufacturer.
・If you are using Windows VISTA, be sure to update to SP2 (Service Pack 2) from Microsoft's page.
・Please check the image for the Bluetooth adapter that DILTS JAPAN confirmed.
・Information about compatible smartphones and Bluetooth adapters that have been confirmed by Windows and DILTS JAPAN is described here.
*There may be changes in product specifications due to the manufacturer's reasons.
*WARNING!!!Make sure you read it!
・This product is intended for use in competition and racing.
・Use of the product is entirely at the customer's own risk, from installation to use.
・DILTS JAPAN is not responsible for any damage caused by the use of this product. If used improperly, the engine can be seriously damaged.
・DILTS JAPAN shall not be liable for any damage caused by the act of a third party who installs the product or other accidents, or by the intentional or negligent misuse of the product by the customer.
・DILTS JAPAN shall not be liable for any incidental or consequential damages arising out of the use or inability to use this product.
・This product is not related to any knowledge of how to use a computer, Windows, or download a smartphone.
・The operation method of your computer or smartphone depends on the model you are using. Please consult a specialist or the shop where you purchased the product.
・Please do not use this product if you are not able to do so or do not know how to do so.(Please ask a specialist shop)
・Please make sure that your iOS device supports Bluetooth 4.0LE (iPhone4s or later, ipad 3rd generation or later) before you purchase.
・If you are using an Android device, please make sure that your Android device is compatible with this app before purchasing.
・Also, Android devices without built-in Bluetooth function cannot be connected.
*For customers who have a PC without built-in BlueTooth and want to use an aftermarket Bluetooth adapter with a USB connector.
・DILTS JAPAN products work only with Windows standard Bluetooth function and driver.
・All of the aftermarket products of various manufacturers cannot be used, because they are operated by different drivers of each manufacturer.
・If you are using a USB Bluetooth adapter, please use the Bluetooth device and Bluetooth driver on the Windows standard control panel without installing the software supplied by the manufacturer.
・If you are using Windows VISTA, be sure to update to SP2 (Service Pack 2) from Microsoft's page.
・Please check the image for the Bluetooth adapter that DILTS JAPAN confirmed.
・Information about compatible smartphones and Bluetooth adapters that have been confirmed by Windows and DILTS JAPAN is described here.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
GROM 17
