8 Hole Type Aluminum Wheel 8-inches/5.5 J by KEPSPEED [Product Contents] Swing arm Wheel Receive Wide Suspension Front Sprocket Offset Kit for Drum Brake Attachment Quantity: Pair (for Left and Right) Brake Rod Offset Drum Brake Arm
[Description]
This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts. Perfect fit for stock Monkey drum brakes! GM-MOTO and KEPSPEED have completed a system that both companies are satisfied with. The attachment for the stock drum unit is a high precision machined aluminum product. Of course, you can upgrade the system to the disc specification later, and conversely, it is possible to downgrade from the disc specification. Please prepare your HONDA stock drum unit. GM-MOTO offers a wide swingarm system with 5.5J wide wheels. The specification of the wheel is 8 hole type 8 inch 5.5J made by KEPSPEED. Of course, the swingarm specification is available with or without stabilizer with extra thick hexagonal cross section from +6cm to +20cm.
Note
4L MONKEY
Caution
[Notes on purchase] *All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas. *It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required. [About the installation] *This kit is for tube tires.Tires and tubes are sold separately. *HONDA stock drum unit (drum hub and drum brake unit) is not included in the kit. *The installation of the drum unit has been confirmed for AB27 and 4L monkey hubs such as Z50J.The fitment of other hubs is unknown. ※ Due to individual differences in the stock drum unit, the length of the stud bolt (wheel fixing bolt) on the drum side may be insufficient.In this case, remove the stud bolts and use M8-20 bolts to fix the wheel. *The drive sprocket offset kit requires the sprocket portion of the generator cover to be machined off.However, some Chinese engines such as Lifan 150cc may not be able to support 4 points. Please use the 420 size sprockets for Monkey. ※ Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual. *Please make sure that the person with experience in motorcycle maintenance performs the assembly work. *The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this. *Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding. *If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap. *If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case. ※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems. *Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems. ※ GM-MOTO does not accept returns for any reason after the product has been installed. *There may be changes in product specifications due to the manufacturer's reasons.
