Check my coupons
Product Detail
Specification:
Color: Silver
Material: Duralumin / NC cutting
Weight: 40g
Material: Duralumin / NC cutting
Weight: 40g
[Description]
This is the support to install 2 pot calipers such as [LEAD 100] on [190mm] disc rotors!
A gem to bring to the Honda crowd!
If you don't want to use the JOG parts and the Yamambo looks too small, this is the one for you!
Because the pad area is larger than Yamambo, the braking force is more effective than Yamambo!
The 190mm discs can be used with NS-1 rear discs or LEAD 100 / 90 discs.(Replacements are available).
The caliper can be used for LEAD 100 / 50 (98-), FTR223 / 250, MTX200, SPACY 125, TD200WR, TS200 / 125, RM250 and so on.
With the enlarged caliper piston, you can get the full performance by changing the master cylinder to 1 / 2 size!
The stock 1/2 master cylinder is available from DMR-JAPAN.
A gem to bring to the Honda crowd!
If you don't want to use the JOG parts and the Yamambo looks too small, this is the one for you!
Because the pad area is larger than Yamambo, the braking force is more effective than Yamambo!
The 190mm discs can be used with NS-1 rear discs or LEAD 100 / 90 discs.(Replacements are available).
The caliper can be used for LEAD 100 / 50 (98-), FTR223 / 250, MTX200, SPACY 125, TD200WR, TS200 / 125, RM250 and so on.
With the enlarged caliper piston, you can get the full performance by changing the master cylinder to 1 / 2 size!
The stock 1/2 master cylinder is available from DMR-JAPAN.
Caution
*You can use DIO brake hoses, but you should change the caliper side banjo to 20 degree type to make it look cooler.(See attached image)
*Brake pads [for LEAD 100] cannot be used.DT200WR series can be used.Daytona part number 62116
*This product is not compatible with some SR models where the axle shaft and support of the wheel are co-tightened.
*Because the handlebar diameter is different for combination brake vehicles, the reinforced master cannot be installed as is.
*Brake pads [for LEAD 100] cannot be used.DT200WR series can be used.Daytona part number 62116
*This product is not compatible with some SR models where the axle shaft and support of the wheel are co-tightened.
*Because the handlebar diameter is different for combination brake vehicles, the reinforced master cannot be installed as is.