Check my coupons
Product Detail
Specification:
Material: Made of steel (handlebar)
[Set components]
・Handlebar
・Clutch Black Outer Cable
[handlebar size]
・Total height: 95mm
・Total width: 700mm
・Effective width of the holder mounting part: 125mm
・Pullback size: 180mm
・Insertion angle: 27 degrees
・Forward leaning angle: 55 degrees
[Set components]
・Handlebar
・Clutch Black Outer Cable
[handlebar size]
・Total height: 95mm
・Total width: 700mm
・Effective width of the holder mounting part: 125mm
・Pullback size: 180mm
・Insertion angle: 27 degrees
・Forward leaning angle: 55 degrees
[Description]
Handlebar and necessary cable & hose set
Note
Caution
*Handlebar set is a set of handles and cables / hoses that need to be replaced.Please note the parts required separately.
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
*This is required when replacing the stock taper handlebar (Φ28.6).
Spacer ring Φ28.6 to Φ22.2 HB0881
*This is required when extending the harness.
Universal extension cords: 1 set, 10 cords, 350L HA5784
*There is no dedicated extension harness available, so please use a universal extension cord.Universal extension harness is also available.
*Clutch needs to be replaced. (Stock not available)
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
*This is required when replacing the stock taper handlebar (Φ28.6).
Spacer ring Φ28.6 to Φ22.2 HB0881
*This is required when extending the harness.
Universal extension cords: 1 set, 10 cords, 350L HA5784
*There is no dedicated extension harness available, so please use a universal extension cord.Universal extension harness is also available.
*Clutch needs to be replaced. (Stock not available)
