Check my coupons
Product Detail
Specification:
Material: Steel (Handlebar)
[Product Contents]
Handlebar
Clutch Black Outer Cable
[Handlebar Size]
Overall Height: 130mm
Overall Width: 655mm
Effective Width of Holder Mounting Part: 130mm
Pull Back Size: 250mm
Internal Angle: 45-degrees
Forward Tilt Angle: 60-degrees
[Product Contents]
Handlebar
Clutch Black Outer Cable
[Handlebar Size]
Overall Height: 130mm
Overall Width: 655mm
Effective Width of Holder Mounting Part: 130mm
Pull Back Size: 250mm
Internal Angle: 45-degrees
Forward Tilt Angle: 60-degrees
[Description]
Handlebar and necessary cable & hose set
Note
Caution
*Handlebar set is a set of handles and cables / hoses that need to be replaced.Please note the parts required separately.
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
*This is required when replacing the stock taper handlebar (Φ28.6).
Spacer ring Φ28.6 to Φ22.2 HB0881
*This is required when extending the harness.
Universal extension cords: 1 set, 10 cords, 350L HA5784
*There is no dedicated extension harness available, so please use a universal extension cord.Universal extension harness is also available.
*Spacer is not required for FAT Condor (Φ28.6).
*Clutch needs to be replaced. (Stock not available)
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
*This is required when replacing the stock taper handlebar (Φ28.6).
Spacer ring Φ28.6 to Φ22.2 HB0881
*This is required when extending the harness.
Universal extension cords: 1 set, 10 cords, 350L HA5784
*There is no dedicated extension harness available, so please use a universal extension cord.Universal extension harness is also available.
*Spacer is not required for FAT Condor (Φ28.6).
*Clutch needs to be replaced. (Stock not available)
