- Home
- Model
- HONDA 0 - 50cc
- MAGNA50
- Motorcycle Parts
- Engine Parts
- Radiators
- Oil Coolers
- Oil Coolers
- SP Takegawa
- SP Takegawa: Compact Cool AW Kit (Rubber Hose) Oil Cooler Kit
Compact Cool AW Kit (Rubber Hose) Oil Cooler Kit
- Product number: 07-07-0284
-
- IN STOCK
- Out Stock
- SP Takegawa
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Old Parts Number
3 Fin: 07-07-0095
4 Fin: 07-07-0094
3 Fin: 07-07-0095
4 Fin: 07-07-0094
[Description]
This is an oil cooler kit for bikes equipped with SP Takegawa's special clutch kit.
Compact design oil cooler with oil cooler plate and oil cooler guard as standard equipment.
■Applicable bike specifications
Only for bikes equipped with SP Takegawa special clutch (casting type clutch cover or die-cast clutch cover)
■How to remove the oil
By removing the oil filter cover from the special clutch cover and installing the optional oil cooler unit, oil can be taken out to the oil cooler.
■Outlet for special dry clutch cover (sold separately)
This oil cooler outlet is installed in the oil filter cover of the special clutch and dry clutch, and an oil passage is provided.There are two types of outlets for the oil cooler, which can be selected according to the installation position of the oil cooler.
The following oil cooler unit can be installed on both die-cast clutch cover and aluminum casting clutch cover.
・Machined Aluminum
・With O-ring
・Installation hose inner diameter 8mm
■Outlet type 1 (upward): 07-07-0020
■Outlet type 2 (front direction): 07-07-0021
Caution
*This kit can not be installed without SP Takegawa special clutch kit.Die-cast clutch cover compatible
*This kit does not include the oil cooler unit (oil outlet).You will need to purchase it separately.
*The old type oil cooler unit (09-07-056/057) is only compatible with the cast type clutch cover.
*When using the die-cast clutch cover, the thermostat unit and oil hole plug cannot be installed at the same time.
*When adding oil, the amount of oil is usually 3 fines to the specified amount of oil: 40cc / 4 fin: Add 60cc.
*This information is current as of December 1, 2012.Please note that there may be some changes in specifications and prices.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*This kit does not include the oil cooler unit (oil outlet).You will need to purchase it separately.
*The old type oil cooler unit (09-07-056/057) is only compatible with the cast type clutch cover.
*When using the die-cast clutch cover, the thermostat unit and oil hole plug cannot be installed at the same time.
*When adding oil, the amount of oil is usually 3 fines to the specified amount of oil: 40cc / 4 fin: Add 60cc.
*This information is current as of December 1, 2012.Please note that there may be some changes in specifications and prices.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/