Check my coupons
Product Detail
Specification:
[Components]
・Rubber cap x 2pcs
・Insulation material x 1 piece
(Oil tray shape)
・Rubber cap x 2pcs
・Insulation material x 1 piece
(Oil tray shape)
[Description]
It is compatible with stock side cowl only.
It is compatible with the stock exhaust and can be used with the side stand.
It is an under cowl that also serves as an engine guard.
This is a replacement for the stock under cowl.
[Yoshimura's R-77S Cyclone Carbon End can be installed on the under cowl SPL without any modification.
It is compatible with the stock exhaust and can be used with the side stand.
It is an under cowl that also serves as an engine guard.
This is a replacement for the stock under cowl.
[Yoshimura's R-77S Cyclone Carbon End can be installed on the under cowl SPL without any modification.
Note
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*If the product interferes with the exhaust, please modify it by yourself.
*Image is twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*If the product interferes with the exhaust, please modify it by yourself.
*Image is twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
