Check my coupons
Product Detail
Specification:
Pipe length: 350mm
Gadget Mount Range: 310mm
Bar: Φ22.2
[Material]
・Bar body: Steel cationic paint finish
・Clamp: Aluminum urethane paint finish
・Bar end cap: plastic
Gadget Mount Range: 310mm
Bar: Φ22.2
[Material]
・Bar body: Steel cationic paint finish
・Clamp: Aluminum urethane paint finish
・Bar end cap: plastic
[Description]
A bar is made to mount multiple gadgets such as a phone, USB charger, navigation system, etc.
World Walk has released a bar to mount your smartphone in a highly visible location.
It has been very popular, but when World Walk sees customers' bikes at events, World Walk has seen more and more gadgets (useful accessories) mounted around the handlebars.
However, in recent years, the number of vehicles with tapered handlebars has been increasing, and the diameter of the handlebars is not constant, making it difficult to install gadgets, and many scooters do not have exposed handlebars for clamping, so handlebar-mounted gadgets cannot be installed.
Also, the shape of the handlebar is not straight, so it may be difficult to install.
Therefore, World Walk has developed a bar that can be used to mount multiple gadgets.
Multi-gadget mounting bar.
[It incorporates a rigid design that is ideal for mounting multiple gadgets]
The number of gadgets that can be mounted around the handlebars, such as smartphones, drink holders, USB chargers and navigation systems, is increasing, and as mentioned above, the number of users who mount multiple gadgets in order to ride their bikes comfortably is on the rise.
The multi-gadget mount bar has a slightly different installation method depending on the model, but it is strong enough to mount multiple gadgets, and the bar body is made of Φ22.2 the same material as Japanese handlebars.
Most of the gadgets for motorcycles can be mounted.
In order to avoid interference with the vehicle body, the length of the bar varies depending on the model, but it is designed to mount about 3-5 gadgets.
[World Walk has designed the meter with full consideration for its visibility]
The meter displays important information such as speed, gasoline level and odometer.Therefore, you don't want to lose visibility of the meter when you install the gadget.
Although the position of the gadget has to be considered, World Walk has adjusted the bar so that the visibility of the meter is not deteriorated as much as possible.
[It is designed so that it does not hit the tank even when the handlebar is turned fully]
There are many bikes where the clearance between the switch box and the petrol tank is too narrow when the handlebars are turned fully up.
Therefore, if you mount the gadget directly on the handlebar, there is a risk of interference.
The multi-gadget bar is designed so that the gadget mounting bar is higher than the handlebar to prevent interference.
The bar unit is made of hard, abrasion-resistant steel and finished with a cationic coating because it is designed for repeated attachment and removal of gadgets.
This coating is highly effective in preventing rust and corrosion because it can form a thick coating film with excellent adhesiveness.
The bar clamps are made of lightweight, corrosion-resistant aluminum and finished with paint.
The bar ends have plastic caps.
Prevents water from entering in case of rain.
Not all the materials are the same, but the most suitable material is selected according to the location.
World Walk has released a bar to mount your smartphone in a highly visible location.
It has been very popular, but when World Walk sees customers' bikes at events, World Walk has seen more and more gadgets (useful accessories) mounted around the handlebars.
However, in recent years, the number of vehicles with tapered handlebars has been increasing, and the diameter of the handlebars is not constant, making it difficult to install gadgets, and many scooters do not have exposed handlebars for clamping, so handlebar-mounted gadgets cannot be installed.
Also, the shape of the handlebar is not straight, so it may be difficult to install.
Therefore, World Walk has developed a bar that can be used to mount multiple gadgets.
Multi-gadget mounting bar.
[It incorporates a rigid design that is ideal for mounting multiple gadgets]
The number of gadgets that can be mounted around the handlebars, such as smartphones, drink holders, USB chargers and navigation systems, is increasing, and as mentioned above, the number of users who mount multiple gadgets in order to ride their bikes comfortably is on the rise.
The multi-gadget mount bar has a slightly different installation method depending on the model, but it is strong enough to mount multiple gadgets, and the bar body is made of Φ22.2 the same material as Japanese handlebars.
Most of the gadgets for motorcycles can be mounted.
In order to avoid interference with the vehicle body, the length of the bar varies depending on the model, but it is designed to mount about 3-5 gadgets.
[World Walk has designed the meter with full consideration for its visibility]
The meter displays important information such as speed, gasoline level and odometer.Therefore, you don't want to lose visibility of the meter when you install the gadget.
Although the position of the gadget has to be considered, World Walk has adjusted the bar so that the visibility of the meter is not deteriorated as much as possible.
[It is designed so that it does not hit the tank even when the handlebar is turned fully]
There are many bikes where the clearance between the switch box and the petrol tank is too narrow when the handlebars are turned fully up.
Therefore, if you mount the gadget directly on the handlebar, there is a risk of interference.
The multi-gadget bar is designed so that the gadget mounting bar is higher than the handlebar to prevent interference.
The bar unit is made of hard, abrasion-resistant steel and finished with a cationic coating because it is designed for repeated attachment and removal of gadgets.
This coating is highly effective in preventing rust and corrosion because it can form a thick coating film with excellent adhesiveness.
The bar clamps are made of lightweight, corrosion-resistant aluminum and finished with paint.
The bar ends have plastic caps.
Prevents water from entering in case of rain.
Not all the materials are the same, but the most suitable material is selected according to the location.
Note
* The image is only for reference. The image shown may differ from the actual product.
Applicable Models
BURGMAN400
