Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
100mm disk grinder, for Φ15mm (for Φ16mm)
Product Detail
Specification:
[#40] For rough finishing
[Quantity] 5 sheets
[Material] Abrasive grain: zirconia
[Size]
Outer Diameter: 100mm
Hole Diameter: Φ15
Abrasive cloth thickness: 9mm
[Components]
・Body x 5
・Spacer x 5
[Quantity] 5 sheets
[Material] Abrasive grain: zirconia
[Size]
Outer Diameter: 100mm
Hole Diameter: Φ15
Abrasive cloth thickness: 9mm
[Components]
・Body x 5
・Spacer x 5
[Description]
Its softness makes it very effective for curved surfaces!
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexibility applied by unique softness]
The feature is that the backing of the cloth is very small and bends greatly, so the pressure can be adjusted to the object, and it is especially effective for curved surfaces.
Supplemental: When it touches the object to be polished, it makes a burr as shown in the image.
This causes the pressure to disperse, making it easy to adapt to the object, and it is highly effective on curved surfaces.
This "software" is the best choice for modeling free-form surfaces.
[Feature 2 - Smoothing]
This is because the protruding part is easily shaved off by the soft's characteristic "bent".
It is suitable for making it smooth.
*It is also the good point of "Soft" that it can be changed by the way of pressurization.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexibility applied by unique softness]
The feature is that the backing of the cloth is very small and bends greatly, so the pressure can be adjusted to the object, and it is especially effective for curved surfaces.
Supplemental: When it touches the object to be polished, it makes a burr as shown in the image.
This causes the pressure to disperse, making it easy to adapt to the object, and it is highly effective on curved surfaces.
This "software" is the best choice for modeling free-form surfaces.
[Feature 2 - Smoothing]
This is because the protruding part is easily shaved off by the soft's characteristic "bent".
It is suitable for making it smooth.
*It is also the good point of "Soft" that it can be changed by the way of pressurization.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Caution
*Please use it with the attached spacer (Japanese disc grinder is Φ15mm, overseas is Φ16mm).
*The abrasive cloth has many free parts, for example, if you apply it vertically to a thin steel plate (1mm, etc.), it will catch and bite easily.Please be careful to use it at an angle when the edge is strong.
*The abrasive cloth has many free parts, for example, if you apply it vertically to a thin steel plate (1mm, etc.), it will catch and bite easily.Please be careful to use it at an angle when the edge is strong.
Applicable Models
100mm disk grinder, for Φ15mm (for Φ16mm)
