- Home
- Model
- HARLEY-DAVIDSON 1001cc -
- FLHXXX STREETGLIDE TRIKE
- Motorcycle Parts
- Engine Parts
- Radiators
- Oil Coolers
- Oil Coolers
- Neofactory
- Neofactory: [ULTRA COOL] Lower Fairing Mount Oil Cooler
[ULTRA COOL] Lower Fairing Mount Oil Cooler
- Product number: 025263
-
- IN STOCK
- Out Stock
- Neofactory
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Manufacturer's part number] SMT-4
[Description]
This oil cooler system is equipped with dual fans and
It is a type that installs next to the radiator of the left lower fairing.
When the temperature of the oil reaches about 100 degrees, the special thermo detects it and activates the fan,
Cools the engine more efficiently.
The oil can be cooled without running.
LED light informs the driver when the fan is running.
It is expected to delay the deterioration of oil performance as well as to prevent overheating.
It is waterproof and dustproof, and has been certified IP55.
It is especially recommended for those who often drive in the summer or in traffic jams.
This is an upgraded product equipped with a fan that has a higher air volume than the conventional product.
It is a type that installs next to the radiator of the left lower fairing.
When the temperature of the oil reaches about 100 degrees, the special thermo detects it and activates the fan,
Cools the engine more efficiently.
The oil can be cooled without running.
LED light informs the driver when the fan is running.
It is expected to delay the deterioration of oil performance as well as to prevent overheating.
It is waterproof and dustproof, and has been certified IP55.
It is especially recommended for those who often drive in the summer or in traffic jams.
This is an upgraded product equipped with a fan that has a higher air volume than the conventional product.
Caution
*Set the oil hose in a way that it does not interfere with the frame or wiring.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight, so the work should be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images. However, You can’t specify the color.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight, so the work should be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images. However, You can’t specify the color.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/