- Home
- Motorcycle Parts
- Engine Parts
- Ignition Parts
- CDIs
- H.Craft
- H.Craft: Programmable DC-CDI
Check my coupons
Product Detail
Specification:
[Specification]
・Adjustable speed: 2000-16500rpm
・Input Voltage: 9-16V
・Ignition timing adjustment range: ±60 degrees
・Compatible coils: Coil for CDI
[wiring]
・Red: 12V (ACC) with ignition key ON
・Green: Grounding Cable
・Yellow: Ignition Coil
・Blue: Pickup coil (Pulsar)
・Adjustable speed: 2000-16500rpm
・Input Voltage: 9-16V
・Ignition timing adjustment range: ±60 degrees
・Compatible coils: Coil for CDI
[wiring]
・Red: 12V (ACC) with ignition key ON
・Green: Grounding Cable
・Yellow: Ignition Coil
・Blue: Pickup coil (Pulsar)
[Description]
The versatility of the pickup coil allows it to be used on almost all CDI ignition vehicles.
The DC circuit eliminates the need for an exciter coil and instead uses battery power.
Therefore, it is possible to revive the vehicle which CDI and exciter coil are not available due to production discontinuation.
The ignition timing has a memory function so that two settings can be stored.
1. Adjustable Rotation Speed: 2000-16500rpm (vehicle with 1 signal per crank revolution)
2. Input Voltage: 9-16V(Overcharged vehicles will be damaged prematurely.)
3. Ignition timing adjustment range: ±60 degrees
4. Compatible coils: Coil for CDI
The DC circuit eliminates the need for an exciter coil and instead uses battery power.
Therefore, it is possible to revive the vehicle which CDI and exciter coil are not available due to production discontinuation.
The ignition timing has a memory function so that two settings can be stored.
1. Adjustable Rotation Speed: 2000-16500rpm (vehicle with 1 signal per crank revolution)
2. Input Voltage: 9-16V(Overcharged vehicles will be damaged prematurely.)
3. Ignition timing adjustment range: ±60 degrees
4. Compatible coils: Coil for CDI
Caution
*Please do not install unless you are an experienced person who can judge the quality of the electrical components such as stator coil.
*If the ground wire on the vehicle side is defective, or if you use a battery made overseas, the charging voltage will not rise and the regulator will be damaged early.
*Please be sure to measure the charging voltage after installation.
*One CDI is required for each ignition coil.
*Please read the product description to the end before purchasing.
*Overcharging the battery by more than 15.5V or installing it in a high temperature place may cause damage.
*Please adjust the ignition timing carefully.Incorrect adjustment will result in engine damage.
*Please check the wiring carefully as incorrect wiring will result in immediate damage.
*Please use the plug, the cord, and the cap with the resistance because there is a possibility of malfunction by the ignition noise.
*Some vehicles work fine without resistor.
*Ignition coils that produce a strong spark noise can also cause malfunctions.
*In case of operation failure due to noise, it may be improved by adding a resistor of about 1kΩ to the wiring to the pickup coil CDI.
*In the case of a vehicle with two signals from the flywheel in one crank revolution, the corresponding revolution speed will be halved.
*If the ground wire on the vehicle side is defective, or if you use a battery made overseas, the charging voltage will not rise and the regulator will be damaged early.
*Please be sure to measure the charging voltage after installation.
*One CDI is required for each ignition coil.
*Please read the product description to the end before purchasing.
*Overcharging the battery by more than 15.5V or installing it in a high temperature place may cause damage.
*Please adjust the ignition timing carefully.Incorrect adjustment will result in engine damage.
*Please check the wiring carefully as incorrect wiring will result in immediate damage.
*Please use the plug, the cord, and the cap with the resistance because there is a possibility of malfunction by the ignition noise.
*Some vehicles work fine without resistor.
*Ignition coils that produce a strong spark noise can also cause malfunctions.
*In case of operation failure due to noise, it may be improved by adding a resistor of about 1kΩ to the wiring to the pickup coil CDI.
*In the case of a vehicle with two signals from the flywheel in one crank revolution, the corresponding revolution speed will be halved.
Applicable Models
Universal
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/