- Home
- Model
- HONDA 126 - 250cc
- NSR250R
- Motorcycle Parts
- Exhausts
- Expansion Chambers
- T2 Racing
- T2 Racing: Steel Chamber Body (Left/Right) [STREET]
Steel Chamber Body (Left/Right) [STREET]
- Product number: T2-CB-LR-036
-
- IN STOCK
- Out Stock
- T2 Racing
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Product Description]
・Right side body x 1 pc
・Left side body x 1 pc
・Flange x 2 pcs
・Flange Spring x 4 pcs
・Mounting bolt and nut (8mm x 25mm) x 2 sets
・Stand part bolt nut (8mm x 45mm) x 1set
・Bracket with bush x 2 in a set
・Installation Instructions
・Right side body x 1 pc
・Left side body x 1 pc
・Flange x 2 pcs
・Flange Spring x 4 pcs
・Mounting bolt and nut (8mm x 25mm) x 2 sets
・Stand part bolt nut (8mm x 45mm) x 1set
・Bracket with bush x 2 in a set
・Installation Instructions
[Description]
Introducing T2 Racing Stock Twin Chamber for MC21 / 28 [STREET].
This model is designed specifically, and it is more ideal for street riding than the [RACE-stock] which is based on the chamber made by T2 Racing.
Several types of prototype chambers is made for the street and repeatedly tested them on the dynamometer to create the [STREET], and the graph in the photo was measured with a stock engine, air cleaner installed and limiter released.
It's a super high revving chamber holding 65.3 horsepower, 4.1 kilos with its peak speed of 11,500 rpm.
The chamber characteristics are easy to handle for all riders, and the power is strong in the high RPM range!
No carburetor setting required with bolt-on design!
It is compatible with stock step, stock cowl, pillion step, and side stand, and can be installed without any problem.
Rear tires up to 160 size can be mounted.
This model is designed specifically, and it is more ideal for street riding than the [RACE-stock] which is based on the chamber made by T2 Racing.
Several types of prototype chambers is made for the street and repeatedly tested them on the dynamometer to create the [STREET], and the graph in the photo was measured with a stock engine, air cleaner installed and limiter released.
It's a super high revving chamber holding 65.3 horsepower, 4.1 kilos with its peak speed of 11,500 rpm.
The chamber characteristics are easy to handle for all riders, and the power is strong in the high RPM range!
No carburetor setting required with bolt-on design!
It is compatible with stock step, stock cowl, pillion step, and side stand, and can be installed without any problem.
Rear tires up to 160 size can be mounted.
Caution
*Images may contain other types.
*This is the body only.
*The picture of the vehicle is with stainless steel chamber.
*The silencer in the vehicle installation image is a long full stainless steel silencer.
*The single image is made of stainless steel.
*There may be changes in product specifications due to the manufacturer's reasons.
*This is the body only.
*The picture of the vehicle is with stainless steel chamber.
*The silencer in the vehicle installation image is a long full stainless steel silencer.
*The single image is made of stainless steel.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/