Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
CB1300SF 18-20
Product Detail
Specification:
[Rated voltage]
・DC12V
[Power consumption]
・Hi beam 30W / Lo beam 30W
[LED]
・CREE XLamp XP-L LEDs
[color temperature]
・Emission color: 6000 Kelvin
[Specification]
・DC12V
[Power consumption]
・Hi beam 30W / Lo beam 30W
[LED]
・CREE XLamp XP-L LEDs
[color temperature]
・Emission color: 6000 Kelvin
[Specification]
[Description]
The combination of the stock headlight lens and H4 LED (30w) provides a brightness that far surpasses the stock LED!!!
All the necessary parts for installation are included.
Simply replace the stock LED headlights with the headlights included with this product and install the dedicated connection harness and controller.
36,600 candela!
The Lo beam of the stock LED headlight emits light at 10.8w, which is about the same brightness as a 55w halogen bulb in terms of lumens.
By replacing the headlight with a Protec LED headlight, the brightness will increase many times as shown in the comparison image, and the illumination range will increase and safety will be improved.
[Stock LED headlight, does it feel dark?]
The stock LED headlight of '17-CB1100EX / RS is 10.8W, which is the same brightness as halogen bulb.
If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED.
Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED.
This product enables to install PROTEC H4 LED bulb by replacing the headlight unit, and the headlight will be many times brighter.
[Clear multi-reflector lens]
The lens surface of the stock LED headlight has four projector lenses in the center and four round position lamp lenses around the periphery, making it look like the lights on the ceiling of an operating room, so it is heard that many users feel uncomfortable with the design of the headlight.
The familiar HONDA stock multi-reflector lens can be used to create a clean look and feel.
[Choice of color temperature is 6000K and 3000K]
Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 34,100 candela.
The optical axis can be adjusted to the standard range without shifting.
Protec has introduced BANZAI's HT-322 headlight tester to measure the headlights during development.
[Adoption of reliable CREE LED!]
A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
[Waterproof Electric Fan Cooling]
A really bright LED generates heat due to the large input current and becomes hot.
In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan.
It is essential equipment to maintain stable brightness.
All the necessary parts for installation are included.
Simply replace the stock LED headlights with the headlights included with this product and install the dedicated connection harness and controller.
36,600 candela!
The Lo beam of the stock LED headlight emits light at 10.8w, which is about the same brightness as a 55w halogen bulb in terms of lumens.
By replacing the headlight with a Protec LED headlight, the brightness will increase many times as shown in the comparison image, and the illumination range will increase and safety will be improved.
[Stock LED headlight, does it feel dark?]
The stock LED headlight of '17-CB1100EX / RS is 10.8W, which is the same brightness as halogen bulb.
If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED.
Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED.
This product enables to install PROTEC H4 LED bulb by replacing the headlight unit, and the headlight will be many times brighter.
[Clear multi-reflector lens]
The lens surface of the stock LED headlight has four projector lenses in the center and four round position lamp lenses around the periphery, making it look like the lights on the ceiling of an operating room, so it is heard that many users feel uncomfortable with the design of the headlight.
The familiar HONDA stock multi-reflector lens can be used to create a clean look and feel.
[Choice of color temperature is 6000K and 3000K]
Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 34,100 candela.
The optical axis can be adjusted to the standard range without shifting.
Protec has introduced BANZAI's HT-322 headlight tester to measure the headlights during development.
[Adoption of reliable CREE LED!]
A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
[Waterproof Electric Fan Cooling]
A really bright LED generates heat due to the large input current and becomes hot.
In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan.
It is essential equipment to maintain stable brightness.
Caution
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
Applicable Models
CB1300SF 18-20
