- Home
- Model
- HARLEY-DAVIDSON 1001cc -
- FLS SOFTAIL SLIM
- Motorcycle Parts
- Bodyworks
- Fenders
- Fender Eliminators
- Pine Valley
- Pine Valley: Short License Plate Bracket Kit
Short License Plate Bracket Kit
- Product number: PV-SNB-FXBB
-
- IN STOCK
- Out Stock
- Pine Valley
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Kit Contents]
・Short License Plate Bracket Body (Stainless Steel / Black)
・Bolts and washers for fixing the number bar bracket
・LED license plate lighting
・Reflector
・Short License Plate Bracket Body (Stainless Steel / Black)
・Bolts and washers for fixing the number bar bracket
・LED license plate lighting
・Reflector
[Description]
This is a short license plate bracket kit developed by Pine Valley specifically for the 2018 and later Street Bob Softail Slim.
This is a special version of the bracket kit which was sold before.
Even though the short rear fender is installed, the stock license bracket will ruin the style of the rear area.
If you install Pine Valley original short license bracket, the rear area is clear!!!
The rear tires can be seen clearly and you can customize it while keeping the stock style.
The LED license plate light is hidden inside the rear fender to reduce the presence of the license plate, but still illuminates the license plate.
This is an all-in-one complete kit that also includes a reflector.
When installing the bracket, the rear fender must be removed and the wiring for the license plate light must be done. However, the bracket can be installed by bolt-on and no drilling or special processing is required.
This is a special version of the bracket kit which was sold before.
Even though the short rear fender is installed, the stock license bracket will ruin the style of the rear area.
If you install Pine Valley original short license bracket, the rear area is clear!!!
The rear tires can be seen clearly and you can customize it while keeping the stock style.
The LED license plate light is hidden inside the rear fender to reduce the presence of the license plate, but still illuminates the license plate.
This is an all-in-one complete kit that also includes a reflector.
When installing the bracket, the rear fender must be removed and the wiring for the license plate light must be done. However, the bracket can be installed by bolt-on and no drilling or special processing is required.
Caution
*When this product is used together with "Kijima Saddlebag Guard DHW", etc., the length of the bolt may not be enough and the strength may be insufficient.Please check the product you are using and prepare a bolt about 5mm long separately.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/