Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
FLHPE 97-08
FLHR 97-08
FLHRC 97-08
FLHRPE 97-08
FLHRS 97-08
FLHT 97-08
FLHTC 97-08
FLHTCU 97-08
FLHTCUS C 97-08
FLHTK 97-08
FLHX 97-08
FLTR 97-08
FLTRU 97-08
FLTRX 97-08
Show more
Product Detail
Specification:
Material: Made of FRP
Specifications: Black gel finish (bare metal), unpainted
Applicable exhaust: V&H Twin Slash Oval Muffler
Components: Bagger Rear Fender, Round Top Cover, Saddle Bag Extension
Components: Tail lamp,License plate light,Tail lamp dimming module
[Description]
Low Price Bagger Kit 97-08 for Vance Oval.
This kit consists of bagger rear fender, round top cover and saddlebag extension.
Rear Fender 97-08 Touring Model Narrow Tail (DV-1850-RN8)
Round Top Cover(DV-1850-RTS)
Saddle Back Extension for Twin Slash Oval Muffler (DV-1850-EXR2)
By using the stock saddlebags, you can customize your bagger with low price.
Easy to remove and replace the stock fender.
Tail lamp, license plate light and tail lamp dimming module are also included.
In case of Vance Oval and Monster Oval, you need to modify the muffler part of bagger fender.
These bagger fenders are designed to replace the stock fenders and can be installed without any modification to the stock fenders, as long as you are able to remove and install the fenders.
Device's bagger rear fender is made of not only glass fiber material but also core mat in the middle layer to increase its strength.
In order to increase the strength of the mounting holes to the frame, steel plates are kneaded into the middle layer near the holes to increase the strength.
The tour pack detachable can be installed by processing the hardware relief along the postcard line in advance.
The attached tail lamp has a blinker inside and flashes orange when the lower 7cm part of the lamp is lit.
This product is compatible with vehicle inspection.
The standard type tail lamp has red lens on the whole surface and blinker flashes at the bottom 7cm.
Device original product.
This kit consists of bagger rear fender, round top cover and saddlebag extension.
Rear Fender 97-08 Touring Model Narrow Tail (DV-1850-RN8)
Round Top Cover(DV-1850-RTS)
Saddle Back Extension for Twin Slash Oval Muffler (DV-1850-EXR2)
By using the stock saddlebags, you can customize your bagger with low price.
Easy to remove and replace the stock fender.
Tail lamp, license plate light and tail lamp dimming module are also included.
In case of Vance Oval and Monster Oval, you need to modify the muffler part of bagger fender.
These bagger fenders are designed to replace the stock fenders and can be installed without any modification to the stock fenders, as long as you are able to remove and install the fenders.
Device's bagger rear fender is made of not only glass fiber material but also core mat in the middle layer to increase its strength.
In order to increase the strength of the mounting holes to the frame, steel plates are kneaded into the middle layer near the holes to increase the strength.
The tour pack detachable can be installed by processing the hardware relief along the postcard line in advance.
The attached tail lamp has a blinker inside and flashes orange when the lower 7cm part of the lamp is lit.
This product is compatible with vehicle inspection.
The standard type tail lamp has red lens on the whole surface and blinker flashes at the bottom 7cm.
Device original product.
Note
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
*Processing of the muffler opening on the rear fender side may be required.
*Wiring modification is required to install the tail lamp and license plate light.
*By using the harness kit (sold separately), it can be installed by coupler-in.
*You will need a Load Equalizer III.
*This product is made of FRP.This is an unpainted product with a black gel finish (bare metal).
*Please make sure to check the installation on the vehicle before painting.Check the installation by tightening the bolts and nuts.
*It is recommended to use a professional painter who is knowledgeable about painting.We do not accept returns or exchanges after painting or processing.
*For the convenience of production, a split type mold is used, and burrs may appear on the side of the mold.Please prepare the surface before painting.
*Custom parts are mainly focused on improving the appearance.Please install the product at your own risk with the understanding that it may reduce the original performance of the vehicle.
*In developing and commercializing our products, we have conducted installation and driving tests, but there is a possibility that problems may occur even when the products are installed in vehicles that are considered to be compatible.
*In no event shall any claim be made due to installation.
*Please explain the above characteristics of custom parts to your customers before recommending them to us.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Processing of the muffler opening on the rear fender side may be required.
*Wiring modification is required to install the tail lamp and license plate light.
*By using the harness kit (sold separately), it can be installed by coupler-in.
*You will need a Load Equalizer III.
*This product is made of FRP.This is an unpainted product with a black gel finish (bare metal).
*Please make sure to check the installation on the vehicle before painting.Check the installation by tightening the bolts and nuts.
*It is recommended to use a professional painter who is knowledgeable about painting.We do not accept returns or exchanges after painting or processing.
*For the convenience of production, a split type mold is used, and burrs may appear on the side of the mold.Please prepare the surface before painting.
*Custom parts are mainly focused on improving the appearance.Please install the product at your own risk with the understanding that it may reduce the original performance of the vehicle.
*In developing and commercializing our products, we have conducted installation and driving tests, but there is a possibility that problems may occur even when the products are installed in vehicles that are considered to be compatible.
*In no event shall any claim be made due to installation.
*Please explain the above characteristics of custom parts to your customers before recommending them to us.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Applicable Models
FLHPE 97-08
FLHR 97-08
FLHRC 97-08
FLHRPE 97-08
FLHRS 97-08
FLHT 97-08
FLHTC 97-08
FLHTCU 97-08
FLHTCUS C 97-08
FLHTK 97-08
FLHX 97-08
FLTR 97-08
FLTRU 97-08
FLTRX 97-08
Show more
