Product Detail

Specification:

[Color] Blade Hose: Black
[Oil Hose Type] Blade Hose #4
[Compatible With] SP Takegawa Special Clutch(sand casting, Die-Cast, TYPE-R WET / DRY) / SP Takegawa dry clutch(Type 2 ver.1 / ver.2)
[Specification] Outer diameter: Φ11mm / Inner diameter: Φ5.6mm

[Description]

■Details
The oil cooler body is attached to the steering stem of the SP Takegawa Φ27 or Φ30 front fork kit and fixed under the headlight.
The oil cooler unit attached to the oil filter cover of SP Takegawa special clutch cover (with various filters) or dry type clutch (type 2) is used to take out the oil.

■Blade Hose #4
This nylon braid hose has an outside diameter of Φ11mm, which is ideal for small vehicles.In addition, since the inner diameter Φ5.6mm is adopted, the burden to the oil pump is reduced.
Nylon braid hoses are lightweight and flexible, and offer excellent flexibility in handling.
When installed, the black braid hose enhances the vehicle.

■Compact Cool Main Unit
The main body of the cooler adopts the compact cooler with excellent cooling effect.
By installing an oil cooler, you can suppress the rise in oil temperature due to the increase in engine bore.
Oil cooler plate and guard are standard equipment.
The Compact Cool body is available with either a 3-fin 4 oil line or a 4-fin 5 oil line.

Note

[Components]
Oil Cooler Unit (Type2) x 1Set (07-07-0366)
Compact Cool 4 Fin x 1 (00-07-0104)
Banjo Set (AN#4/M12) x 1Set (00-07-0184)
Braided Hose #4 (450mm) x 1 (00-07-0214)
Braided Hose #4 (550mm) x 1 (00-07-0215)
Oil Cooler Bracket Kit x 1Set (00-07-0213)
*If there's no link to the repair parts, please quote us through Non-listed Item quotation

[Documents]
Manual: Japanese

[Online Catalog]
SP Takegawa's Online Catalog (Japanese)

Caution

*Exclusively for vehicles equipped with SP Takegawa Φ27 Front Fork Kit or Φ30 Front Fork Kit.(Attach the oil cooler bracket to the steering stem supplied with the kit.)
*Not compatible with SP Takegawa upside down front fork kit.
*Applicable to vehicles equipped with SP Takegawa special clutch (sand casting, die casting, TYPE-R WET / DRY) or dry clutch (Type 2 ver.1 / ver.2).It can be installed to the special clutch (die-cast) used for SP Takegawa's complete engine (primary type).
*When SP Takegawa special clutch (die-cast) is installed, oil hole plug or thermostat unit cannot be installed at the same time.Simultaneous installation will result in serious engine trouble.
*This product cannot be installed with stock exhaust or up exhaust at the same time.
*The amount of oil is usually 3 fin. to the specified amount of oil: Approx. 40cc / 4 fin: Add approx. 60cc.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all