- Home
- Model
- KAWASAKI 751 - 1000cc
- NINJA ZX-10R
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Foot Controls
- Rearsets Kits
- SNIPER
- SNIPER: Rearsets For Racing
Check my coupons
Product Detail
Specification:
Color: gold
for racing
variable position
■6 step position / reverse shift availalbe
31.5mm Back / 42.5mm Up
31.5mm Back / 55mm Up
44mm Back / 42.5mm Up
44mm Back / 55mm Up
56.5mm Back / 42.5m Up
56.5mm Back / 55mm Up
for racing
variable position
■6 step position / reverse shift availalbe
31.5mm Back / 42.5mm Up
31.5mm Back / 55mm Up
44mm Back / 42.5mm Up
44mm Back / 55mm Up
56.5mm Back / 42.5m Up
56.5mm Back / 55mm Up
[Description]
・6 step position, reverse shift pattern can be also done.
・The left and right pedal tips can be changed in two positions.
・The steps are knurled for superior non-slip performance.
・The spindle is equipped with double bearings.
・The left and right pedal tips can be changed in two positions.
・The steps are knurled for superior non-slip performance.
・The spindle is equipped with double bearings.
Caution
[Regarding installation]
*All the items in the picture are included.
*Brake hoses need to be replaced on the brake side and ABS vehicles.
*Master cylinder cup needs to be relocated.
*Shift side, shift rod and shift gear arm are not included.
*The shift rod is approx. 90mm with the stock shifter.
*Please be prepared for the step position.
*Shift gear arm, recommended to change to aftermarket one because of the large stroke with the stock one.
*When shifting in reverse, the stock shift gear arm cannot be used.
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*Please tighten the bolts tightly as the delivery is in the state of temporary assembly.
*Use a thread locker agent to prevent the bolts from loosening.
*These steps are for racing only and are not compatible with ABS vehicles.
*There may be changes in product specifications due to the manufacturer's reasons.
*All the items in the picture are included.
*Brake hoses need to be replaced on the brake side and ABS vehicles.
*Master cylinder cup needs to be relocated.
*Shift side, shift rod and shift gear arm are not included.
*The shift rod is approx. 90mm with the stock shifter.
*Please be prepared for the step position.
*Shift gear arm, recommended to change to aftermarket one because of the large stroke with the stock one.
*When shifting in reverse, the stock shift gear arm cannot be used.
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*Please tighten the bolts tightly as the delivery is in the state of temporary assembly.
*Use a thread locker agent to prevent the bolts from loosening.
*These steps are for racing only and are not compatible with ABS vehicles.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/