- Home
- Model
- KAWASAKI 751 - 1000cc
- Z1 (900 Super Four)
- Motorcycle Parts
- Bodyworks
- Seats Accessories
- Other Seat Parts
- Class4 Engineering
- Class4 Engineering: Slim Seat
Check my coupons
Product Detail
Specification:
Z1 / Z2 type hitch (single bar type) (see photo)
[Description]
It is a necessity for the person who has trouble with the footing in Z1 / Z2 / KZ1000 series.
The seat leather is cut for the molding of the Slim & Slim seat sponge, so there is no unnecessary excess or shifting of the seat pattern downwards.
When you ride on it, you can see that the width is much narrower than stock.If you don't feel comfortable with your feet, you won't feel comfortable riding the bike, will you?
Please solve these problems and enjoy Z to the fullest.
The mounting hitch for Z1 (single bar type) and KZ1000 series (U-shaped) are different, so please specify.
1. Please put the slim seat on the place where the stock seat was removed.If I can get it on without a problem
Install the seat fitting to the front and rear of the frame bracket for horizontal opening.
At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Please install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.
It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
The seat leather is cut for the molding of the Slim & Slim seat sponge, so there is no unnecessary excess or shifting of the seat pattern downwards.
When you ride on it, you can see that the width is much narrower than stock.If you don't feel comfortable with your feet, you won't feel comfortable riding the bike, will you?
Please solve these problems and enjoy Z to the fullest.
The mounting hitch for Z1 (single bar type) and KZ1000 series (U-shaped) are different, so please specify.
1. Please put the slim seat on the place where the stock seat was removed.If I can get it on without a problem
Install the seat fitting to the front and rear of the frame bracket for horizontal opening.
At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Please install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.
It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other types.
*It is common to Z series, but there is a case that the seat is warped or the gap between the seat and the tail cowl is too tight just by installing the seat.
*Please adjust the height and angle of the seat hinge.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*Calss4 Engineering does not accept any claims regarding the leather.
*The image may contain other types.
*It is common to Z series, but there is a case that the seat is warped or the gap between the seat and the tail cowl is too tight just by installing the seat.
*Please adjust the height and angle of the seat hinge.
*Please note that this product is handmade one by one, so it will take some time for delivery.
*Calss4 Engineering does not accept any claims regarding the leather.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/