Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
S1000RR 19- (K67)
Product Detail
Specification:
for street use
[Description]
Stock lights and mirrors with built-in blinkers can be installed on.
2 pieces windshields of the half upper and unde can be used with the stock or windshields that can be installed on stock cowl.
Under cowl left rear support bracket included.
Oil catch structure.
Please use it at the race meeting.
This product can be installed on vehicles with full exhaust.(Depending on the exhaust being used, modification to the rear right side of the under cowl is required.)
Under cowl is made of heat-resistant resin.
As of September 15, 2020, after the full cowl was installed, the mileage was 300km without the heat resistant sheet attached to the back side, and we have not had any problems with heat burns.
2 pieces windshields of the half upper and unde can be used with the stock or windshields that can be installed on stock cowl.
Under cowl left rear support bracket included.
Oil catch structure.
Please use it at the race meeting.
This product can be installed on vehicles with full exhaust.(Depending on the exhaust being used, modification to the rear right side of the under cowl is required.)
Under cowl is made of heat-resistant resin.
As of September 15, 2020, after the full cowl was installed, the mileage was 300km without the heat resistant sheet attached to the back side, and we have not had any problems with heat burns.
Note
* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The image shows sample (carbon) product.
*Emblem is not included.
*The emblem is not compatible with the stock one because the back side of the emblem is too complicated.
*Please purchase the emblem of 45-50mm diameter separately.
*The duct part is a full-open type.
*The clearance between the catalyst and the inside of the under cowl is about 20-30mm.
*After the catalytic converter is installed 10mm, the under cowl will have the initial smell of heating.
*Please purchase the heat resistant sheet (sold separately) if you are unsure.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Emblem is not included.
*The emblem is not compatible with the stock one because the back side of the emblem is too complicated.
*Please purchase the emblem of 45-50mm diameter separately.
*The duct part is a full-open type.
*The clearance between the catalyst and the inside of the under cowl is about 20-30mm.
*After the catalytic converter is installed 10mm, the under cowl will have the initial smell of heating.
*Please purchase the heat resistant sheet (sold separately) if you are unsure.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Applicable Models
S1000RR 19- (K67)
